Service Manual

8. Adhere the mylar that covers the fan cable.

Next steps

1. Install the base cover.

2. Follow the procedure in After working inside your computer.

Coin-cell battery

Removing the coin-cell battery

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you note

the BIOS setup program settings before removing the coin-cell battery.

About this task

The figure indicates the location of the coin-cell battery and provides a visual representation of the removal procedure.

Steps

1. Disconnect the coin-cell battery cable from the I/O board.

2. Peel the coin-cell battery from the palm-rest and keyboard assembly.

Installing the coin-cell battery

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

Removing and installing components