Inspiron 17 5000 Series Servisní příručka Model počítače: Inspiron 17–5758 Regulační model: P28E Regulační typ: P28E001
Poznámky, upozornění a varování POZNÁMKA: POZNÁMKA označuje důležité informace, které umožňují lepší využití počítače. VÝSTRAHA: UPOZORNĚNÍ poukazuje na možnost poškození hardwaru nebo ztráty dat a poskytuje návod, jak se danému problému vyhnout. VAROVÁNÍ: VAROVÁNÍ upozorňuje na potenciální nebezpečí poškození majetku, úrazu nebo smrti. Copyright © 2015 Dell Inc. Všechna práva vyhrazena. Tento produkt je chráněn autorskými právy a právy na duševní vlastnictví Spojených států a mezinárodními právy.
Obsah Před manipulací uvnitř počítače.........................................10 Než začnete ......................................................................................... 10 Bezpečnostní pokyny..............................................................................10 Doporučené nástroje.............................................................................. 11 Po manipulaci uvnitř počítače............................................ 13 Vyjmutí baterie................................
Vyjmutí paměťových modulů............................................. 24 Přípravné kroky......................................................................................24 Postup.................................................................................................. 24 Montáž paměťových modulů.............................................. 26 Postup.................................................................................................. 26 Následné kroky.............................
Demontáž optické jednotky................................................ 38 Přípravné kroky......................................................................................38 Postup.................................................................................................. 38 Montáž optické jednotky..................................................... 41 Postup.................................................................................................. 41 Následné kroky....................
Vyjmutí desky V/V................................................................ 54 Přípravné kroky......................................................................................54 Postup.................................................................................................. 54 Montáž desky I/O..................................................................56 Postup.................................................................................................. 56 Následné kroky.......
Demontáž portu napájecího adaptéru................................72 Přípravné kroky......................................................................................72 Postup.................................................................................................. 72 Montáž portu napájecího adaptéru.................................... 74 Postup.................................................................................................. 74 Následné kroky....................................
Demontáž čelního krytu displeje........................................ 87 Přípravné kroky......................................................................................87 Postup.................................................................................................. 87 Montáž rámečku displeje.................................................... 89 Postup.................................................................................................. 89 Následné kroky.......................
Vyjmutí kabelu displeje..................................................... 104 Přípravné kroky....................................................................................104 Postup................................................................................................ 105 Výměna kabelu displeje.................................................... 106 Postup................................................................................................ 106 Následné kroky....................
Před manipulací uvnitř počítače VÝSTRAHA: Chcete-li předejít poškození komponent a karet, manipulujte s nimi pouze za hrany a nedotýkejte se kolíků a kontaktů. POZNÁMKA: Obrázky v tomto dokumentu se mohou lišit od vašeho počítače v závislosti na sestavě, kterou jste si objednali. Než začnete 1 2 Uložte a zavřete všechny otevřené soubory a ukončete všechny spuštěné aplikace. Vypněte počítač. – – Windows 8.1: Na obrazovce Start klikněte nebo klepněte na ikonu napájení → Vypnout.
VAROVÁNÍ: Před otevřením panelů nebo krytu počítače odpojte všechny zdroje napájení. Po dokončení práce uvnitř počítače nainstalujte zpět všechny kryty, panely a šrouby předtím, než připojíte zdroje napájení. VÝSTRAHA: Chcete-li předejít poškození počítače, ujistěte se, že je pracovní plocha rovná a čistá. VÝSTRAHA: Chcete-li předejít poškození komponent a karet, manipulujte s nimi pouze za hrany a nedotýkejte se kolíků a kontaktů.
• křížový šroubovák, • plastová jehla.
Po manipulaci uvnitř počítače VÝSTRAHA: Pokud šrouby uvnitř počítače zůstanou uvolněné nebo volně ležet, můžete počítač vážně poškodit. 1 Našroubujte všechny šrouby a ujistěte se, že žádné nezůstaly volně uvnitř počítače. 2 Připojte všechna externí zařízení, periferie a kabely, které jste odpojili před prací v počítači. 3 Vraťte zpět všechny karty, disky a ostatní části, které jste odebrali před prací v počítači. 4 Připojte počítač a všechna připojená zařízení do elektrických zásuvek.
Vyjmutí baterie VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Postup 1 Zavřete displej a otočte počítač spodní stranou vzhůru.
4 Překlopte počítač, otevřete displej a podržte tlačítko napájení po dobu pěti sekund, abyste základní desku uzemnili.
Vložení baterie VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Postup Umístěte baterii do její pozice a zaklapněte ji na své místo.
Sejmutí spodního krytu VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky Vyjměte baterii.
3 18 Pomocí plastové jehly jemně vypáčte základní kryt směrem od vnitřního okraje a sejměte ho ze základny počítače.
Nasazení krytu základny VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Vyjmutí pevného disku VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. VÝSTRAHA: Pevné disky jsou křehké.
3 4 Pomocí poutka zvedněte sestavu pevného disku ze základny počítače. 1 šrouby (4) 2 poutko pro vysunutí 3 sestava pevného disku 4 kabel pevného desku 5 západka 2 mezikus Odpojte mezikus od pevného disku.
5 Odstraňte šrouby, kterými je k pevnému disku upevněn jeho držák. 6 Sejměte držák z pevného disku.
Instalace pevného disku VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. VÝSTRAHA: Pevné disky jsou křehké.
Vyjmutí paměťových modulů VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
2 Vysuňte paměťový modul ze slotu paměťového modulu.
Montáž paměťových modulů VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
2 Modul pevně zasuňte pod úhlem do slotu a poté modul zatlačte směrem dolů, dokud nezapadne na místo. POZNÁMKA: Jestliže neuslyšíte cvaknutí, modul vyjměte a postup vkládání zopakujte. 1 paměťový modul 2 slot paměťového modulu 3 zářez 4 západka Následné kroky 1 Nasaďte spodní kryt. 2 Vložte baterii.
Demontáž bezdrátové karty VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
4 Vysuňte bezdrátovou kartu ze základní desky a vyjměte ji.
Instalace bezdrátové karty VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Vyjmutí knoflíkové baterie VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
1 plastová jehla 3 patice knoflíkové baterie 32 2 knoflíková baterie
Vložení knoflíkové baterie VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Demontáž klávesnice VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky Vyjměte baterii.
2 3 Pomocí plastové jehly jemně uvolněte západky, které upevňují klávesnici k sestavě opěrky rukou. 1 plastová jehla 3 sestava opěrky rukou 2 klávesnice Opatrně překlopte klávesnici a položte ji na sestavu opěrky rukou.
4 Zdvihněte výčnělky a odpojte kabel klávesnice a kabel podsvícení klávesnice (volitelný) od základní desky. POZNÁMKA: Kabel podsvícení klávesnice se nachází jen v noteboocích, které byly dodány s podsvícenou klávesnicí. 5 36 1 kabel podsvícení klávesnice 2 západka 3 kabel klávesnice 4 klávesnice Zdvihněte klávesnici společně s kabely ze sestavy opěrky rukou.
Instalace klávesnice VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Demontáž optické jednotky VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Demontujte klávesnici.
2 Otočte počítač a otevřete displej. 3 Pomocí plastové jehly vytlačte sestavu optické jednotky z pozice pro optickou jednotku. 4 Vysuňte sestavu optické jednotky z pozice pro optickou jednotku. 5 1 sestava optické jednotky 3 plastová jehla 2 opěrka rukou Jemně z optické jednotky vypáčte její rámeček.
6 Vyšroubujte šrouby, které upevňují optickou jednotku k držáku optické jednotky. POZNÁMKA: Poznačte si orientaci držáku optické jednotky, abyste ho mohli správně nainstalovat.
Montáž optické jednotky VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Demontáž základny počítače VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
2 Vyšroubujte šrouby připevňující základnu počítače k sestavě opěrky rukou. 1 šrouby (4) 3 kabel optické jednotky 2 západka konektoru 3 Zavřete displej a otočte počítač spodní stranou vzhůru. 4 Odpojte kabel reproduktoru od základní desky. 5 Vyjměte kabely antény z vodítek na základně počítače.
6 44 Vyšroubujte šrouby připevňující základnu počítače k sestavě opěrky rukou.
7 Začněte odzadu prsty páčit základnu počítače od sestavy opěrky rukou. POZNÁMKA: Ověřte, zda jsou anténní kabely zcela vyjmuty z vodítek na základně počítače. 1 základna počítače 8 Otočte základnu počítače spodní stranou nahoru. 9 Vyjměte vsuvku optické jednotky.
10 Vyjměte reproduktory.
Montáž základny počítače VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Postup 1 Namontujte vsuvku optické jednotky. 2 Namontujte reproduktory.
Vyjmutí reproduktorů VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
2 Vyjměte reproduktory i jejich kabel ze základny počítače.
Instalace reproduktorů VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Vyjmutí vsuvky optické jednotky VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
1 základna počítače 3 vsuvka optické jednotky 52 2 západky (2)
Vložení vsuvky optické jednotky VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Vyjmutí desky V/V VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
3 Zdvihněte západku a odpojte kabel panelu I/O od desky I/O.
Montáž desky I/O VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Demontáž sestavy chladiče VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. VAROVÁNÍ: Chladič se může za běžného provozu zahřát.
4 Vyjměte sestavu chladiče ze základní desky. 1 šrouby (3) 2 kabel ventilátoru 3 sestavu chladiče, 4 upevňovací šrouby (3) Postup (integrovaná grafická karta) 1 Odpojte kabel ventilátoru od základní desky. 2 Podle pořadí vyznačeného na sestavě chladiče postupně povolte jisticí šrouby, které připevňují sestavu chladiče k základní desce. 3 Odšroubujte šroubky, kterými je sestava chladiče připevněna k základní desce.
4 Vyjměte sestavu chladiče ze základní desky.
Montáž sestavy chladiče VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
5 Postupujte podle postupu od kroku 4 po krok 6 v části „Instalace pevného disku“. 6 Nasaďte spodní kryt. 7 Vložte baterii.
Demontáž základní desky VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. POZNÁMKA: Výrobní číslo vašeho počítače je umístěno na základní desce.
Postup 1 Otočte počítač vzhůru nohama a otevřete displej, co nejvíce je to možné. 2 Zdvihněte západky konektoru a odpojte kabel desky tlačítka napájení a kabel dotykového panelu od základní desky. 1 kabel desky tlačítka napájení 2 kabel dotykového panelu. 3 Zavřete displej a otočte počítač spodní stranou vzhůru. 4 Zvedněte západku a odpojte kabel displeje od základní desky. 5 Vyšroubujte šroub, který připevňuje základní desku k sestavě opěrky rukou.
6 7 64 Odlepte kabel desky I/O od sestavy opěrky rukou. 1 kabel desky I/O 2 základní deska 3 šroub 4 západka konektoru 5 kabel displeje Opatrně zvedněte základní desku z vnitřního okraje, abyste ji uvolnili z konektoru pro základní desku na sestavě opěrky rukou.
8 Otočte základní desku vzhůru nohama. 1 9 základní deska 2 sestava opěrky rukou Odpojte kabel portu adaptéru napájení ze základní desky.
10 Zdvihněte západku a odpojte kabel desky I/O od základní desky. 1 základní deska 3 kabel desky I/O 2 11 Základní desku vyjměte ze základny počítače.
Montáž základní desky VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. POZNÁMKA: Výrobní číslo vašeho počítače je umístěno na základní desce.
Následné kroky 1 Namontujte sestavu chladiče. 2 Namontujte desku I/O. 3 Postupujte podle postupu od kroku 3 po krok 8 v části „Montáž základny počítače“. 4 Postupujte podle postupu od kroku 4 po krok 7 v části „Instalace optické mechaniky“. 5 Namontujte klávesnici. 6 Vložte knoflíkovou baterii. 7 Proveďte instalaci paměťových modulů. 8 Namontujte bezdrátovou kartu. 9 Postupujte podle postupu od kroku 4 po krok 6 v části „Instalace pevného disku“. 10 Nasaďte spodní kryt. 11 Vložte baterii.
Demontáž desky konektoru baterie VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
4 70 Vyjměte desku konektoru baterie ze sestavy opěrky rukou.
Montáž desky konektoru baterie VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Demontáž portu napájecího adaptéru VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
4 Vyjměte port napájecího adaptéru spolu s kabelem ze sestavy opěrky rukou.
Montáž portu napájecího adaptéru VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Demontáž sestavy displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
2 Odlepte pásky upevňující kabely antény k sestavě opěrky rukou. 1 anténní kabely (2) 3 pásky (5) 2 vodítko 3 Otevřete displej pod úhlem 90 stupňů. 4 Položte počítač na kraj stolu tak, aby sestava opěrky rukou byla na stole, sestava displeje přesahovala okraj stolu a závěsy displeje byly směrem nahoru. 5 Vyšroubujte šrouby, které připevňují závěsy displeje k sestavě opěrky rukou.
6 Zvedněte sestavu displeje ze sestavy opěrky rukou.
Montáž sestavy displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
11 Nasaďte spodní kryt. 12 Vložte baterii.
Vyjmutí desky tlačítka napájení VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
4 Vysuňte desku tlačítka napájení ze západek na opěrce rukou. 5 Vyjměte desku tlačítka napájení spolu s kabelem ze sestavy opěrky rukou.
Instalace desky tlačítka napájení VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
11 Postupujte podle postupu od kroku 4 po krok 6 v části „Instalace pevného disku“. 12 Nasaďte spodní kryt. 13 Vložte baterii.
Demontáž sestavy opěrky rukou VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Přípravné kroky 1 Vyjměte baterii. 2 Sejměte spodní kryt.
1 sestava opěrky rukou 85
Montáž sestavy opěrky rukou VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Postup Položte sestavu opěrky rukou na plochý povrch.
Demontáž čelního krytu displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
2 Rámeček displeje vyjměte ze zadního krytu displeje.
Montáž rámečku displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Demontáž panelu displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
2 Jemně zdvihněte panel displeje a otočte jej. 1 šrouby (10) 3 zadní kryt displeje 2 panel displeje.
3 4 92 Opatrně odlepte kabel displeje, zvedněte západku a odpojte kabel displeje od konektoru kabelu displeje. 1 panel displeje. 2 západka 3 kabel displeje 4 páska 5 zadní kryt displeje Zvedněte panel displeje ze zadního krytu displeje.
5 Demontujte závěsy displeje. 1 panel displeje.
Montáž panelu displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
10 Proveďte instalaci paměťových modulů. 11 Namontujte bezdrátovou kartu. 12 Postupujte podle postupu od kroku 4 po krok 6 v části „Instalace pevného disku“. 13 Nasaďte spodní kryt. 14 Vložte baterii.
Demontáž závěsů displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
2 Zvedněte závěsy displeje z panelu displeje. 1 šrouby (6) 3 panel displeje.
Montáž závěsů displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
14 Nasaďte spodní kryt. 15 Vložte baterii.
Demontáž kamery VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
2 Jemně vypačte kameru pomocí plastové jehly ze zadního krytu displeje.
Instalace kamery VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
14 Vložte baterii.
Vyjmutí kabelu displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Postup 1 Odlepte pásky, které připevňují kabel kamery k zadnímu krytu displeje. 2 Poznačte si vedení kabelu a vyjměte kabel displeje z vodítek na zadním krytu displeje. 3 Poznačte si vedení kabelu kamery a vyjměte ho ze zadního krytu displeje.
Výměna kabelu displeje VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance. Postup 1 Zaveďte kabel displeje do vodítek na zadním krytu displeje.
Vyjmutí zadního krytu displeje a sestavy antény VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
Postup Po provedení přípravných kroků nám zbývá pouze zadní kryt displeje a sestava antény.
Montáž zadního krytu displeje a sestavy antény VAROVÁNÍ: Před manipulací uvnitř počítače si přečtěte bezpečnostní informace dodané s počítačem a postupujte podle kroků popsaných v části Před manipulací uvnitř počítače. Po dokončení práce uvnitř počítače postupujte podle pokynů v části Po dokončení práce uvnitř počítače. Další vzorové postupy naleznete na domovské stránce Regulatory Compliance (Soulad s předpisy) na adrese dell.com/ regulatory_compliance.
16 Nasaďte spodní kryt. 17 Vložte baterii.
Aktualizace systému BIOS Aktualizaci systému BIOS je vhodné provést v případě, že je k dispozici jeho nová verze, nebo v případě výměny systémové desky. Postup aktualizace systému BIOS: 1 Zapněte počítač. 2 Přejděte na web dell.com/support. 3 Klikněte na možnost Product Support (Podpora produktu), zadejte výrobní číslo notebooku a klikněte na možnost Submit (Odeslat). POZNÁMKA: Pokud výrobní číslo nemáte k dispozici, použijte funkci automatického rozpoznání nebo ručně vyhledejte model počítače.
Pomoc a kontakt na společnost Dell Zdroje pro vyhledání nápovědy Informace a nápovědu k produktům a službám Dell můžete získat v těchto zdrojích samostatné pomoci. Informace o samostatné pomoci Možnosti samostatné pomoci Přístup k nápovědě systému Windows Windows 8.1 – Otevřete ovládací tlačítko Hledat, zadejte do vyhledávacího pole výraz Nápověda a podpora a stiskněte klávesu Enter. Windows 7 – Klikněte na možnosti Start → Nápověda a podpora.
POZNÁMKA: Dostupnost se liší v závislosti na zemi a produktu a některé služby nemusí být ve vaší zemi k dispozici. POZNÁMKA: Pokud nemáte aktivní internetové připojení, můžete najít kontaktní informace na nákupní faktuře, balicím seznamu, účtence nebo v katalogu produktů společnosti Dell.