Service Manual

Steps

1. Lift the Mylar that covers the system board.

2. Align the notch on the M.2 2280 solid-state drive/Intel Optane H10 with the tab on the M.2 card slot on the system board.

3. Slide the M.2 2280 solid-state drive/Intel Optane H10 into the M.2 card slot on the system board.

4. Replace the screw (M2x2.5) that secures the M.2 2280 solid-state drive/Intel Optane H10 to the palm-rest and keyboard

assembly.

5. Adhere the thermal tape that covers the M.2 2280 solid-state drive/Intel Optane H10.

6. Place the Mylar over the M.2 2280 solid-state drive/Intel Optane H10.

Next steps

1. Install the base cover.

2. Follow the procedure in After working inside your computer.

Removing and installing components