Service Manual

Steps
1. Open the latch and disconnect the touchpad cable from the system board.
2. Open the latch and disconnect the keyboard cable from the system board.
3. Open the latch and disconnect the keyboard-backlight cable from the system board.
4. Disconnect the speaker cable from the system board.
5. Lift the right speaker off the palm-rest and keyboard asssembly.
6. Peel the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
NOTE:
Note the routing of the speaker cables before peeling the tapes that secure the speaker cable to the palm-rest
and keyboard assembly.
7. Lift the speakers along with its cable off the palm-rest and keyboard assembly.
Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the speakers and provides a visual representation of the installation procedure.
34
Removing and installing components