Service Manual

Steps

Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest

and keyboard assembly.

Next steps

1. Install the speakers.

2. Install the system board.

3. Install the power button.

4. Install the I/O board.

5. Install the touchpad.

6. Install the coin-cell battery.

7. Install the fingerprint-reader board.

8. Install the display assembly.

9. Install the touchpad.

10. Install the antenna module, if applicable.

11. Install the power-adapter port.

12. Install the fingerprint-reader board.

13. Install the display assembly.

14. Install the fan (4-cell battery) or the fan (6-cell battery), whichever applicable.

15. Install the 4-cell battery or the 6-cell battery, whichever applicable.

16. Install the base cover.

17. Follow the procedure in After working inside your computer.

Removing and installing components