Service Manual

System setup

NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.

Topics:

• System setup

• Entering BIOS setup program

• Navigation keys

• Boot Sequence

• System setup options

• Clearing CMOS settings

• Clearing BIOS (System Setup) and System passwords

System setup

CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program.

Certain changes can make your computer work incorrectly.

NOTE: Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen

information for future reference.

Use the BIOS Setup program for the following purposes:

● Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.

● Change the system configuration information.

● Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling

base devices.

Entering BIOS setup program

About this task

Turn on (or restart) your computer and press F2 immediately.

Navigation keys

NOTE:

For most of the System Setup options, changes that you make are recorded but do not take effect until you restart

the system.

Keys Navigation

Up arrow Moves to the previous field.

Down arrow Moves to the next field.

Enter Selects a value in the selected field (if applicable) or follow the link in the field.

Spacebar Expands or collapses a drop-down list, if applicable.

Tab Moves to the next focus area.

Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a

message that prompts you to save any unsaved changes and restarts the system.

58 System setup