Service Manual

7. Remove the four M2.5 x 4-mm screws that secure the palm rest bracket.
8. While supporting the palm-rest flex cable, lift out the palm rest bracket and turn it over.
9. Disconnect the reserve battery cable.
10. Remove the reserve battery:
a. Pry the reserve battery free from the metal palm rest bracket.
b. Remove the foam-pad remnants from the palm rest bracket.
Replacing the Reserve Battery
1. Seat the reserve battery and press it into place.
2. Connect the reserve battery cable.
3. Place the palm rest bracket loosely in the palm rest, and connect the palm-rest flex cable to the ZIF connector.
4. Replace the four M2.5 x 4-mm screws that secure the palm rest bracket to the palm rest.
Back to Contents Page



1
M2.5 x 4-mm screws (4)
2
palm rest bracket
3
palm-rest flex cable