Specifications

Keyboard: Dell Inspiron 8200
NOTICE: Position the keyboard/track-stick flex cable so that it is not pinched
when you replace the keyboard in the bottom case.
2. Insert the metal tabs at the left end of the keyboard under the edge of the
bottom case, and fit the keyboard into place.
3. Check that the keyboard is correctly installed. The keys should be flush with the
left and right surfaces of the palm rest.
4. Turn the computer over and reinstall the four M2.5 x 20-mm screws. For extra
stability, you can open the computer slightly and brace the keyboard under each
screw as you install the screw.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/8200/keyboard.htm (5 of 5) [2/28/2004 7:40:51 AM]