Manual

Adding and Replacing Parts 79
7 Insert the battery into the battery bay, or connect the AC adapter to your computer and an
electrical outlet.
8 Reinstall the hard drive. See page 73.
9 Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system
configuration information. If prompted, press <F1> to continue.
To confirm the amount of memory installed in the computer, click the
Start button, click Help and
Support
, and then click Computer Information .
Modem
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 71.
2 Turn the computer over and loosen the captive screws from the modem cover.
3 Place your finger under the cover at the indentation and lift the cover open.
D5169bk1.book Page 79 Thursday, October 21, 2004 4:37 PM