Manual

Adding and Replacing Parts 83
NOTICE: To avoid damaging the Mini PCI card, never place cables under the card.
b
Connect the antenna cables to the Mini PCI card if a wireless card is installed in your
computer.
6 Replace the modem cover.
Hinge Cover
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin
working inside the computer.
1
Follow the procedures in "Before You Begin" on page 71.
2 Remove the hinge cover.:
a Open the display all the way (180 degrees) so that it lies flat against your work surface.
NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.
b
Insert a scribe in the indent to lift the hinge cover on the right side.
c Ease the hinge cover up, moving from right to left, and remove it.
Mini PCI card
antenna cables
D5169bk1.book Page 83 Thursday, October 21, 2004 4:37 PM