Manual

86 Adding and Replacing Parts
www.dell.com | support.dell.com
4 Remove the existing battery:
a Disconnect the battery cable connector from the system board.
b Press the release latch on the side of the coin-cell battery compartment, and lift up the
battery.
5 Install the replacement battery:
a Insert the battery at a 30-degree angle under the release latch with the positive side up,
and then push the battery into place.
b Connect the battery cable to the connector on the system board.
6 Replace the keyboard.
7 Replace the hinge cover.
Display
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
coin-cell battery
release latch
battery cable connector
D5169bk1.book Page 86 Thursday, October 21, 2004 4:37 PM