Service Manual

Back to Contents Page
 Replacing the Inverter Board
Dell™Inspiron™1210ServiceManual


1. Follow the instructions in Before You Begin.

2. Remove the display assembly. See Followtheinstructionsin"BeforeYouBegin"onpage9..

3. Remove the display bezel. See Replacing the Display Bezel.

4. Remove the display panel. See Replacing the Display Panel.

5. Remove the screw that secures the inverter board firmly to the display frame.

6. Remove the inverter board.

7. To replace the inverter board, align the inverter board with the protrusion on the display frame.

8. Replace the screw that secures the inverter board firmly to the display frame.

9. Replace the display panel. See Replacing the Display Panel.

10. Replace the display bezel. See Replacing the Display Bezel.

11. Replace the display assembly. See Followtheinstructionsin"BeforeYouBegin"onpage9..

12. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
inverter board
2
screw