Service Manual

Back to Contents Page
 Replacing the Power Button Board
Dell™Inspiron™1210ServiceManual


1. Follow the instructions in Before You Begin.

2. Remove the palm rest. See Replacing the Palm Rest.

3. Turn the palm rest over and remove the M2.5x3-mm screw that secures the power button board to the palm rest.

4. Lift the power button board off the palm rest.

5. To replace the Power Button Board, insert the power button board into the tabs and tighten the M2.5x3-mm screw.

6. Replace the palm rest. See Replacing the Palm Rest.

7. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
1
M2.5x3-mm screw
2
power button board
3
power button cable

