Service Manual

Back to Contents Page
 Replacing the Power Cable
Dell™Inspiron™1210ServiceManual


1. Follow the procedures in Before You Begin.

2. Remove the palm rest. See Replacing the Palm Rest.

3. Remove the power cable from the power cable connector on the system board.

4. Lift the power unit up and out of the securing tabs away from the base of the computer.

5. To replace the power cable, gently press the power unit into the tabs on the base of the computer so that the unit sits firmly.

6. Attach the power cable to the power cable connector on the system board.

7. Replace the palm rest. See Replacing the Palm Rest.

8. Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
Back to Contents Page

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1
AC adapter port
2
power cable
3
power cable connector

