Dell Inspiron One 2020 Ägarens handbok Datormodell: Inspiron One 2020 Regleringsmodell: W06B Regleringstyp: W06B001
Obs, viktigt och varningar OBS! Detta meddelande innehåller viktig information som kan hjälpa dig att få ut mer av din dator. VIKTIGT! Här anges information om hur potentiell skada på maskinvaran eller dataförlust kan uppstå om anvisningarna inte följs. VARNING! Detta meddelande indikerar risk för skada på egendom eller person, eller livsfara. ____________________ Informationen i det här dokumentet kan komma att ändras. © 2012 Dell Inc. Med ensamrätt.
Innehåll 1 Teknisk överblick . . . . . . . . . . . . . . . . . . . . . . . . Inuti datorn . . . . . . . . . . . . . . Komponenter på moderkortet . 2 Innan du börjar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stänga av datorn och anslutna enheter Säkerhetsanvisningar . . . . . . . . . . . . Rekommenderade verktyg . . . . . . . . . . . . . . . . . . . 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4 Stativhölje .
10 Omvandlarkort . . . . . . . . . . . . . . . . . . . . . . . . . Ta bort omvandlarkortet . . . . Sätta tillbaka omvandlarkortet 11 Minnesmoduler . . . . . . . . . . . . . . . 29 30 . . . . . . . . . . . . . . . . . . . . . . . . 31 . . . . . . . . . . . . . . . Ta bort minnesmodulerna . . . . Sätta tillbaka minnesmodulerna 12 Moderkortshölje . . . . . . . . . . . . . . . 31 33 . . . . . . . . . . . . . . . . . . . . . . . 35 Ta bort moderkortshöljet . . . . Sätta tillbaka moderkortshöljet .
19 Fläkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ta bort fläkten . . . . . Sätta tillbaka fläkten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Strömbrytarmontering . . . . . . . . . . . . . . . . . . Ta bort strömbrytarmonteringen . . . . Sätta tillbaka strömbrytarmonteringen . 21 Processorns kylfläns 57 57 59 . . . . . . . . . . . . . . . . . . . . 61 . . . . . . . . . . . . . . . . . . . . . 61 63 . . . . . . . . . . . .
29 Systeminstallationsprogram . . . . . . . . . . . . . . 95 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 106 107 . . . . . . . . . . . . . . . . . . . . . . . 109 Översikt . . . . . . . . . . . . . Rensa glömda lösenord . . Rensa CMOS-inställningar . 30 Uppdatera BIOS 6 | Innehåll . . . . . . . . . . . . . . . .
1 Teknisk överblick VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance.
Komponenter på moderkortet 18 1 2 3 17 16 4 5 15 6 7 14 8 9 10 8 | 11 Teknisk överblick 12 13
1 processorsockel 2 kontakt för fläktkabel (FANC1) 3 kontakt för kamerakabel (WEBCAM) 4 kontakt för omvandlarkortets kabel (CONVERTER) 5 kontakt för hårddiskens och den 6 optiska enhetens strömkabel (SATAP1) kontakt för den optiska enhetens kabel (SATA_ODD) 7 kontakt för hårddiskkabel (SATA_HDD) 8 kontakt för strömbrytarens och hårddiskaktivitetslampans kabel (PWRCN1) 9 kontakt för IR-kabel (IR_IN) 10 kontakt för bildskärmskabel 11 kontakt för trådlöst Mini-Card-kort (MINICARD WIFI) 12
| Teknisk överblick
2 Innan du börjar Stänga av datorn och anslutna enheter VIKTIGT! Undvik dataförlust genom att spara och stänga alla öppna filer och avsluta alla program innan du stänger av datorn. 1 Spara och stäng alla öppna filer samt avsluta alla öppna program. 2 Klicka på Start och klicka på Stäng av. Microsoft Windows avslutas och datorn stängs av. OBS! Om du använder ett annat operativsystem kan du hitta anvisningar för avstängning i dokumentationen för operativsystemet.
VIKTIGT! När du kopplar bort en kabel ska du alltid dra i kontakten eller i dess dragflik, inte i själva kabeln. Vissa kablar har kontakter med låsflikar eller tumskruvar som måste lossas innan kabeln kan kopplas från. När du kopplar från kablar ska du hålla dem korrekt inriktade för att undvika att kontaktstiften böjs. När du ansluter kablar ska du se till att kontakter och portar är korrekt inriktade. VIKTIGT! Nätverkskablar kopplas först loss från datorn och sedan från nätverksenheten.
3 När du har arbetat inuti datorn När du har slutfört bytesprocedurerna ska du kontrollera följande: • Sätt tillbaka alla skruvar och kontrollera att inga lösa skruvar finns kvar inuti datorn • Placera datorn i upprätt läge • Anslut eventuella externa enheter, kablar, kort och andra delar som du tagit bort innan du påbörjade arbetet med datorn • Anslut datorn och alla anslutna enheter till eluttagen VIKTIGT! Innan du startar datorn sätter du tillbaka alla skruvar och kontrollerar att inga lösa skru
| När du har arbetat inuti datorn
4 Stativhölje VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort stativhöljet Förfarande VIKTIGT! Innan du öppnar datorn placerar du datorn på ett mjukt tygstycke eller en ren yta så att inte bildskärmen repas. 1 Lägg datorn med bildskärmen nedåt på en plan yta.
Sätta tillbaka stativhöljet Förfarande 1 Skjut in flikarna på stativhöljet i spåren i det bakre höljet. 2 Tryck fast stativhöljet tills det klickar på plats. 3 Följ anvisningarna i "När du har arbetat inuti datorn" på sidan 13.
5 Stativ VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort stativet Nödvändiga förhandsåtgärder Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. Förfarande 1 Ta bort skruvarna som håller fast stativet i chassit. 2 Vänd stativet uppåt och skjut bort det från datorn.
Sätta tillbaka stativet Förfarande 1 Skjut in flikarna på stativet i spåren i det bakre höljet. 2 Sätt tillbaka skruvarna som håller fast stativet i chassit. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka stativhöljet. Se "Sätta tillbaka stativhöljet" på sidan 16. 2 Följ anvisningarna i "När du har arbetat inuti datorn" på sidan 13.
6 Bakre hölje VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort det bakre höljet Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17.
Sätta tillbaka det bakre höljet Förfarande Rikta in flikarna på det bakre höljet med flikarna på mittramen och snäpp det bakre höljet på plats. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka stativet. Se "Sätta tillbaka stativet" på sidan 18. 2 Sätt tillbaka stativhöljet. Se "Sätta tillbaka stativhöljet" på sidan 16. 3 Följ anvisningarna i "När du har arbetat inuti datorn" på sidan 13.
7 Hårddisk VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. VIKTIGT! Undvik dataförlust genom att inte ta bort hårddisken medan datorn är påslagen eller i strömsparläge. VIKTIGT! Hårddiskar är mycket känsliga. Var försiktig när du hanterar hårddisken.
Förfarande 1 Ta bort skruvarna som håller fast hårddiskmonteringen i chassit. 2 Skjut ut och lyft bort hårddiskmonteringen och koppla sedan bort ström- och datakabeln från kontakten på hårddisken. 3 2 4 1 1 chassi 2 skruv (3) 3 hårddiskmontering 4 ström- och datakabel 3 Ta bort skruvarna som håller fast hårddiskhållaren i hårddisken. 4 Lyft bort hårddiskhållaren från hårddisken.
Sätta tillbaka hårddisken Förfarande 1 Rikta in skruvhålen på hårddiskhållaren med skruvhålen i hårddisken. 2 Sätt tillbaka skruvarna som håller fast hårddiskhållaren i hårddisken. 3 Anslut ström- och datakabeln till kontakten på hårddiskmonteringen. 4 Placera hårddiskmonteringen på chassit och skjut hårddiskmonteringen på plats. Kontrollera att spåren i hårddiskhållaren sitter ordentligt fast under flikarna på chassit. 5 Sätt tillbaka skruvarna som håller fast hårddiskmonteringen i chassit.
| Hårddisk
8 Optisk enhet VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort den optiska enheten Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
4 Bänd försiktigt bort ramen för den optiska enheten och ta bort den från den optiska enhetsmonteringen. 5 Ta bort skruvarna som håller fast fästet för den optiska enheten i den optiska enheten. 6 Ta bort fästet för den optiska enheten. 4 3 2 1 1 ram för optisk enhet 2 optisk enhet 3 fäste för optisk enhet 4 skruvar (2) Sätta tillbaka den optiska enheten Förfarande 1 Rikta in skruvhålen i fästet för den optiska enheten med skruvhålen i den optiska enheten.
9 B-CAS-kort (endast Japan) VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort B-CAS-kortet Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Sätta tillbaka B-CAS-kortet Förfarande 1 Anslut kabeln för B-CAS-kortet till kontakten på B-CAS-kortet. 2 Vänd på B-CAS-kortet. 3 Rikta in skruvhålet på B-CAS-kortet med skruvhålet i mittramen. 4 Sätt tillbaka skruven som håller fast B-CAS-kortet i mittramen. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka det bakre höljet. Se "Sätta tillbaka det bakre höljet" på sidan 20. 2 Sätt tillbaka stativet. Se "Sätta tillbaka stativet" på sidan 18. 3 Sätt tillbaka stativhöljet.
10 Omvandlarkort VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort omvandlarkortet Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Sätta tillbaka omvandlarkortet Förfarande 1 Rikta in skruvhålen i omvandlarkortet med skruvhålen i chassit. 2 Sätt tillbaka skruvarna som håller fast omvandlarkortet i chassit. 3 Anslut kablarna till kontakterna på omvandlarkortet. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka det bakre höljet. Se "Sätta tillbaka det bakre höljet" på sidan 20. 2 Sätt tillbaka stativet. Se "Sätta tillbaka stativet" på sidan 18. 3 Sätt tillbaka stativhöljet. Se "Sätta tillbaka stativhöljet" på sidan 16.
11 Minnesmoduler VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort minnesmodulerna Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
3 Använd fingertopparna och öppna försiktigt spärrhakarna på vardera sidan av minnesmodulkontakten så att minnesmodulen lossnar. 4 Ta bort minnesmodulen från minnesmodulkontakten.
Sätta tillbaka minnesmodulerna Förfarande 1 Rikta in skåran på minnesmodulen med fliken på minnesmodulkontakten. 2 Skjut in minnesmodulen i kontakten i 45 graders vinkel och tryck sedan modulen nedåt tills den klickar fast på plats. Om du inte hör något klick tar du bort minnesmodulen och försöker igen. OBS! Om minnesmodulen inte installerats ordentligt kanske inte datorn går att starta.
| Minnesmoduler
12 Moderkortshölje VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort moderkortshöljet Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
3 Koppla bort antenningångskontakten från kontakten på TV-mottagarkortet. 4 Ta bort antenningångskontakten. Se "Ta bort antenningången" på sidan 37. 3 2 1 1 moderkortshölje 3 TV-mottagarkort 2 antenningångskabel Sätta tillbaka moderkortshöljet Förfarande 1 Sätt tillbaka antenningångskontakten. Se "Sätta tillbaka antenningången" på sidan 38. 2 Anslut antenningångskabeln till kontakten på TV-mottagarkortet.
13 Antenningång VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort antenningången Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Sätta tillbaka antenningången Förfarande 1 Skjut in kontakten för antenningången i spåret på moderkorthöljet. 2 Sätt tillbaka insexmuttern som håller fast antenningången i moderkorthöljet. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka moderkortshöljet. Se "Sätta tillbaka moderkortshöljet" på sidan 36. 2 Sätt tillbaka det bakre höljet. Se "Sätta tillbaka det bakre höljet" på sidan 20. 3 Sätt tillbaka stativet. Se "Sätta tillbaka stativet" på sidan 18. 4 Sätt tillbaka stativhöljet.
14 Antennmoduler VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort antennmodulerna Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Sätta tillbaka antennmodulerna Förfarande 1 Fäst antennkablarna på chassit. 2 Dra antennkablarna genom kabelhållarna. 3 Anslut antennkablarna till kontakterna på Mini-Card-kortet för trådlös kommunikation. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka moderkortshöljet. Se "Sätta tillbaka moderkortshöljet" på sidan 36. 2 Sätt tillbaka det bakre höljet. Se "Sätta tillbaka det bakre höljet" på sidan 20. 3 Sätt tillbaka stativet. Se "Sätta tillbaka stativet" på sidan 18.
15 TV-mottagarkort (tillval) VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. OBS! Dell garanterar inte att TV-mottagarkort från andra leverantörer är kompatibla med Dells datorer och tillhandahåller inte heller support för sådana kort.
Förfarande 1 Koppla loss kabeln för TV-mottagarkortet från kontakten på TV-mottagarkortet. 2 Ta bort skruven som håller fast TV-mottagarkortet i kontakten på moderkortet. 3 Lyft bort TV-mottagarkortet från kontakten på moderkortet. 1 2 3 1 kabel till TV-mottagarkort 3 TV-mottagarkort 2 skruv VIKTIGT! När TV-mottagarkortet inte sitter i datorn ska det förvaras i en skyddande antistatisk förpackning. Läs "Skydd mot elektrostatisk urladdning" i säkerhetsinstruktionerna som levererades med datorn.
Sätta tillbaka TV-mottagarkortet Förfarande VIKTIGT! Undvik skador på TV-mottagarkortet genom att se till att inte några kablar befinner sig under kortet. 1 Rikta in skåran på TV-mottagarkortet med fliken på kontakten på moderkortet. 2 Sätt i TV-mottagarkortet med 45 graders vinkel i kontakten på moderkortet. 3 Tryck ned den andra sidan av TV-mottagarkortet och sätt tillbaka skruven som håller fast TV-mottagarkortet i kontakten på moderkortet.
| TV-mottagarkort (tillval)
16 Mini-Card-kort för trådlös kommunikation (tillval) VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. OBS! Dell garanterar inte att Mini-Card-kort från andra leverantörer är kompatibla med Dells datorer och tillhandahåller inte heller support för sådana kort.
Förfarande 1 Koppla loss antennkablarna från Mini-Card-kortet. 2 Ta bort skruven som håller fast Mini-Card-kortet på kontakten på moderkortet. 1 2 3 1 skruv 2 Mini-Card-kort 3 antennkablar (2) 3 Lyft bort Mini-Card-kortet från kontakten på moderkortet. VIKTIGT! När Mini-Card-kortet inte sitter i datorn ska det förvaras i en skyddande antistatisk förpackning. Läs "Skydd mot elektrostatisk urladdning" i säkerhetsinstruktionerna som levererades med datorn.
Sätta tillbaka Mini-Card-kortet för trådlös kommunikation Förfarande VIKTIGT! Kontakterna kan bara sättas in på ett sätt. Om du försöker sätta i kontakterna med våld kan du skada kontakterna. VIKTIGT! Undvik skador på Mini-Card-kortet genom att se till att inte några kablar befinner sig under kortet. 1 Passa in skåran i Mini-Card-kortet med fliken på kontakten på moderkortet. 2 Sätt i Mini-Card-kortet med 45 graders vinkel i kontakten på moderkortet.
| Mini-Card-kort för trådlös kommunikation (tillval)
17 Knappcellsbatteri VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. VARNING! Ett nytt batteri kan explodera om det installeras felaktigt. Byt endast ut batteriet mot ett av samma eller motsvarande typ som rekommenderas av tillverkaren.
Sätta tillbaka knappcellsbatteriet Förfarande Sätt i det nya batteriet (CR2032) i batterisockeln med den sida som är märkt med + uppåt och tryck fast det. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka moderkortshöljet. Se "Sätta tillbaka moderkortshöljet" på sidan 36. 2 Sätt tillbaka det bakre höljet. Se "Sätta tillbaka det bakre höljet" på sidan 20. 3 Sätt tillbaka stativet. Se "Sätta tillbaka stativet" på sidan 18. 4 Sätt tillbaka stativhöljet. Se "Sätta tillbaka stativhöljet" på sidan 16.
18 Högtalare VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort högtalarna Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande 1 Koppla bort högtalarkabeln från kontakten (SPEAKER) på moderkortet. 2 Notera hur högtalarnas kabel sitter och lossa försiktigt kabeln från kabelhållarna. 3 Ta bort skruvarna som håller fast högtalarna i mittramen. 4 Lyft bort högtalarna tillsammans med kabeln från mittramen.
Sätta tillbaka högtalarna Förfarande 1 Rikta in skruvhålen på högtalarna med skruvhålen på mittramen. 2 Sätt tillbaka skruvarna som håller fast högtalarna i mittramen. 3 Dra högtalarnas kabel genom kabelhållarna. 4 Anslut högtalarkabeln från kontakten (SPEAKER) på moderkortet. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka moderkortshöljet. Se "Sätta tillbaka moderkortshöljet" på sidan 36. 2 Sätt tillbaka B-CAS-kortet. Se "Sätta tillbaka B-CAS-kortet" på sidan 28.
| Högtalare
19 Fläkt VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort fläkten Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet. Se "Ta bort det bakre höljet" på sidan 19.
Förfarande 1 Koppla bort fläktkabeln från kontakten (FANC1) på moderkortet. 2 Ta bort fläktkabeln från kabelhållaren på fläkten. 3 Ta bort skruvarna som håller fast fläkten i chassit. 4 Lyft bort fläkten och dess kabel från chassit. 1 2 1 skruvar (2) 3 fläktkabel 2 3 fläkt Sätta tillbaka fläkten Förfarande 1 Rikta in skruvhålen på fläkten med skruvhålen i chassit. 2 Sätt tillbaka skruvarna som håller fast fläkten i chassit. 3 Dra fläktkabeln genom kabelhållaren på fläkten.
20 Strömbrytarmontering VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort strömbrytarmonteringen Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande 1 Koppla bort kabeln för strömbrytaren och hårddiskaktivitetslampan från kontakten (PWRCN1) på moderkortet. 2 Anteckna dragningen av kabeln för strömbrytaren och hårddiskaktivitetslampan och ta bort den från kabelhållarna. 3 Ta bort skruven som håller fast strömbrytarmonteringen i mittramen. 4 Skjut strömbrytarmonteringen uppåt i datorn och lyft bort den från mittramen.
Sätta tillbaka strömbrytarmonteringen Förfarande 1 Placera strömbrytarmonteringen på mittramen och skjut den nedåt i datorn. Kontrollera att spåret i strömbrytarmonteringen sitter ordentligt fast under fliken på mittramen. 2 Rikta in skruvhålet i strömbrytarmonteringen med skruvhålet i mittramen. 3 Sätt tillbaka skruven som håller fast strömbrytarmonteringen i mittramen. 4 Dra kabeln för strömbrytaren och hårddiskaktivitetslampan genom kabelhållarna.
| Strömbrytarmontering
21 Processorns kylfläns VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. VARNING! Kylflänsen kan bli väldigt varm även under normal drift. Se till att den svalnat ordentligt innan du vidrör den.
Förfarande 1 I rätt ordning (anges på processorns kylfläns) lossar du fästskruvarna som håller fast processorns kylfläns i moderkortet. 2 Lyft försiktigt bort processorns kylfläns från moderkortet. OBS! Processorns kylfläns kan se olika ut beroende på datormodellen.
Sätta tillbaka processorns kylfläns VIKTIGT! Felaktig inriktning av processorns kylfläns kan orsaka skada på moderkortet och processorn. Förfarande 1 Rengör undersidan av processorns kylfläns från det termiska fettet och applicera det på nytt. OBS! Det ursprungliga termiska fettet kan återanvändas om den ursprungliga processorn och dess kylfläns sätts tillbaka tillsammans.
| Processorns kylfläns
22 Processor VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort processorn Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande 1 Tryck frigöringsspaken på processorkåpan nedåt och dra den därefter utåt så att den lossnar från fliken som håller fast den. 2 Fäll ut frigöringsspaken helt för att öppna processorkåpan. Låt frigöringsspaken vara utfälld så att den nya processorn går att sätta i sockeln. 3 Lyft försiktigt upp processorn för att lossa den från sockeln.
Sätta tillbaka processorn Förfarande 1 Packa upp den nya processorn och var försiktig så att du inte rör vid undersidan av processorn. 2 Om frigöringsspaken på sockeln inte är helt utfälld fäller du ut den hela vägen. VIKTIGT! Jorda dig genom att ta på en omålad metallyta. VIKTIGT! Du måste placera processorn rätt i processorsockeln så att den inte skadas. 3 Passa in inpassningsskårorna på processorn med inpassningssflikarna på sockeln.
7 Rengör undersidan av processorns kylfläns från det termiska fettet. 8 Applicera nytt termiskt fett på processorns ovansida. VIKTIGT! Applicera nytt termiskt fett. Det nya termiska fettet är viktigt för att säkerställa en tillfredsställande termisk förbindelse, vilket är nödvändigt för en optimal processordrift. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka processorns kylfläns. Se "Sätta tillbaka processorns kylfläns" på sidan 63. 2 Sätt tillbaka moderkortshöljet.
23 Moderkort VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort moderkortet Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande OBS! Anteckna hur kablarna är dragna innan du kopplar bort dem från moderkortet. OBS! Datorns servicenummer finns sparat på moderkortet. Du måste ange servicenumret i BIOS när du har bytt ut moderkortet. 1 Koppla bort alla kablar från kontakterna på moderkortet. 2 Ta bort skruvarna som håller fast moderkortet i chassit. 3 Vinkla och lyft upp moderkortet och skjut det sedan åt sidan så att kontakterna på moderkortet lossar från uttagen i chassit. 4 Ta bort moderkortet från chassit.
Sätta tillbaka moderkortet Förfarande 1 Skjut in kontakterna på moderkortet i uttagen i chassit och rikta in skruvhålen i moderkortet med skruvhålen i chassit. 2 Sätt tillbaka skruvarna som håller fast moderkortet i chassit. 3 Anslut de nödvändig kablarna till respektive kontakt på moderkortet. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka processorn. "Sätta tillbaka processorn" på sidan 67. 2 Sätt tillbaka processorns kylfläns. Se "Sätta tillbaka processorns kylfläns" på sidan 63.
| Moderkort
24 Bildskärmspanel VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort bildskärmspanelen Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande 1 Anteckna hur kablarna är dragna (förutom kabeln för omvandlarkortet och antennkablarna) och ta bort dem från kabelhållarna på chassit. 2 Ta bort skruvarna som håller fast chassit i mittramen. 3 Lyft bort chassit tillsammans med bildskärmspanelen från mittramen och placera det på en ren yta.
4 Koppla loss omvandlarkortets kabel från kontakten på bildskärmspanelen. 5 Ta bort skruvarna som håller fast bildskärmspanelen i chassit. 2 1 1 omvandlarkortets kabel 2 skruvar (4) 6 Lyft av chassit från bildskärmspanelen.
7 Lossa tejpen som håller fast bildskärmskabeln i kontakten för bildskärmskabeln. 8 Tryck på frigöringshaken på vardera sidan av bildskärmskabeln och dra sedan i bildskärmskabeln så att den kopplas bort från kontakten.
Sätta tillbaka bildskärmspanelen Förfarande 1 Anslut bildskärmskabeln till kontakten på bildskärmspanelen och fäst den med tejpen. 2 Passa in skruvhålen i bildskärmspanelen med skruvhålen i chassit. 3 Sätt tillbaka skruvarna som håller fast bildskärmspanelen i chassit. 4 Anslut omvandlarkortets kabel till kontakten på bildskärmspanelen. 5 Rikta in skruvhålen i chassit med skruvhålen i mittramen. 6 Sätt tillbaka skruvarna som håller fast chassit i mittramen.
| Bildskärmspanel
25 Infraröd (IR) mottagare VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort den infraröda mottagaren Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande 1 Anteckna hur kablarna är dragna (förutom kabeln för omvandlarkortet och antennkablarna) och ta bort dem från kabelhållarna på chassit. 2 Ta bort skruvarna som håller fast chassit i mittramen. 3 Lyft bort chassit tillsammans med bildskärmspanelen från mittramen och placera det på en ren yta.
4 Tryck flikarna som håller fast IR-mottagaren utåt och ta bort IR-mottagaren från bildskärmsramen.
Sätta tillbaka den infraröda mottagaren Förfarande 1 Sätt IR-mottagaren på plats på bildskärmsramen och snäpp den på plats. 2 Rikta in skruvhålen i chassit med skruvhålen i mittramen. 3 Sätt tillbaka skruvarna som håller fast chassit i mittramen. 4 Dra kablarna genom kabelhållarna på chassit. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka moderkortet. Se "Sätta tillbaka moderkortet" på sidan 71. 2 Sätt tillbaka moderkortshöljet. Se "Sätta tillbaka moderkortshöljet" på sidan 36.
26 Mittram VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort mittramen Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet. Se "Ta bort det bakre höljet" på sidan 19.
Förfarande 1 Frigör flikarna som håller fast mittramen i bildskärmsramen. 2 Lyft bort mittramen från bildskärmsramen.
Sätta tillbaka mittramen Förfarande Rikta in flikarna på mittramen med spåren i bildskärmsramen och snäpp mittramen på plats. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka den infraröda mottagaren. "Sätta tillbaka den infraröda mottagaren" på sidan 82. 2 Sätt tillbaka bildskärmspanelen. Se "Sätta tillbaka bildskärmspanelen" på sidan 77. 3 Sätt tillbaka moderkortet. Se "Sätta tillbaka moderkortet" på sidan 71. 4 Sätt tillbaka moderkortshöljet. Se "Sätta tillbaka moderkortshöljet" på sidan 36.
| Mittram
27 Kameramodul VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort kameramodulen Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande 1 Ta bort skruvarna som håller fast kameramonteringen i bildskärmsramen. 2 Lyft bort kameramonteringen tillsammans med kabeln från bildskärmsramen. 1 2 2 3 1 bildskärmsram 3 skruvar (2) kameramontering 3 Ta bort skruvarna som håller fast kameramodulen i fästet för kameramodulen. 4 Skjut bort kameramodulen från fästet för kameramodulen.
Sätta tillbaka kameramodulen Förfarande 1 Skjut in kameramodulen i fästet för kameramodulen och rikta in skruvhålen i kameramodulen med skruvhålen i fästet för kameramodulen. 2 Sätt tillbaka skruvarna som håller fast kameramodulen i fästet för kameramodulen. 3 Rikta in skruvhålen i kameramonteringen med skruvhålen i bildskärmsramen. 4 Sätt tillbaka skruvarna som håller fast kameramonteringen i bildskärmsramen. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka mittramen.
| Kameramodul
28 Bildskärmsram VARNING! Innan du utför något arbete inuti datorn ska du läsa säkerhetsinstruktionerna som medföljde datorn och följa stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. Ta bort bildskärmsramen Nödvändiga förhandsåtgärder 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet. Se "Ta bort stativet" på sidan 17. 3 Ta bort det bakre höljet.
Förfarande Ta bort bildskärmsramen.
Sätta tillbaka bildskärmsramen Förfarande Placera bildskärmsramen på en ren yta. Nödvändiga efterhandsåtgärder 1 Sätt tillbaka kameramodulen. Se "Sätta tillbaka kameramodulen" på sidan 89. 2 Sätt tillbaka den infraröda mottagaren. Se "Sätta tillbaka den infraröda mottagaren" på sidan 82. 3 Sätt tillbaka mittramen. Se "Sätta tillbaka mittramen" på sidan 85. 4 Sätt tillbaka bildskärmspanelen. Se "Sätta tillbaka bildskärmspanelen" på sidan 77. 5 Sätt tillbaka moderkortet.
| Bildskärmsram
29 Systeminstallationsprogram Översikt Använd systeminstallationsprogrammet för att: • Få information om maskinvaran som är installerad på datorn, till exempel RAM- och hårddiskstorlek • Ändra systemkonfigurationsinformationen • Sätta eller ändra alternativ som användaren kan välja, till exempel användarlösenord, typ av hårddisk som är installerad och aktivering/inaktivering av grundenheter VIKTIGT! Såvida du inte är en mycket kunnig datoranvändare bör du inte ändra inställningarna i programmet.
Systeminstallationsskärmar På systeminstallationsskärmen visas aktuell eller ändringsbar konfigurationsinformation för datorn. Informationen på skärmen delas in i tre områden: setup item (inställningsposter), help screen (hjälpskärmar) och key functions (tangentfunktioner). Setup Item (inställningsposter) — Det här fältet visas på vänster sida av systeminstallationsfönstret.
Alternativ i systeminstallationsprogrammet OBS! Beroende på datorn och vilka enheter som är installerade visas kanske inte alla alternativ exakt som i den här listan.
Memory Technology (minnesteknik) Visar typen av installerat minne Main (huvudmeny)— SATA Information (SATA-information) SATA 1 Device Type (enhetstyp) Visar den SATA-enhet som är ansluten till SATA 1-kontakten Device ID (enhets-ID) Visar serienumret på SATA 1-enheten Device Size (enhetsstorlek) Visar storleken på SATA 1-enheten i GB, om enheten är en hårddisk SATA 2 Device Type (enhetstyp) Visar den SATA-enhet som är ansluten till SATA 2-kontakten Device ID (enhets-ID) Visar serienumret på SATA 2-e
CPU XD Support (CPU XD-support) Här kan du aktivera eller inaktivera inaktiveringsläget för körning för processorn — Enabled (aktiverad) eller Disabled (inaktiverad) (standardinställningen är Enabled (aktiverad)) Limit CPUID Value (begränsa CPUID-värde) Här kan du begränsa maxvärdet som processorns standard CPUID-funktion stöder — Enabled (aktiverad) eller Disabled (inaktiverad) (standardinställningen är Disabled (inaktiverad)) Multi Core Support (flerkärnssupport) Här kan du aktivera eller inaktivera
Advanced (avancerat) — Onboard Device Configuration (konfiguration av inbyggda enheter) Onboard Audio Controller (inbyggd ljudstyrenhet) Här kan du aktivera eller inaktivera den inbyggda ljudstyrenheten Enabled (aktiverad) eller Disabled (inaktiverad) (standardinställningen är Enabled (aktiverad)) SATA Mode (SATA-läge) Visar datorns SATA-läge (standardinställningen är ATA) Onboard LAN Controller (inbyggd LAN-styrenhet) Här kan du aktivera eller inaktivera den inbyggda LAN-styrenheten Enabled (aktiverad
Boot (uppstart) (fortsättning) 1st Boot Device (första startenhet) Visar den första startenheten 2nd Boot Device (andra startenhet) Visar den andra startenheten 3rd Boot Device (tredje startenhet) Visar den tredje startenheten 4th Boot Device (fjärde startenhet) Visar den fjärde startenheten 5th Boot Device (femte startenhet) Visar den femte startenheten Hard Disk Drivers (hårddiskar) Visar startsekvensen för hårddisken USB Storage Drivers (USB-lagringsenheter) Visar startsekvensen för USB-lagrin
Auto Power On Mode (läget automatisk start) Här kan du ställa in datorn så att den startar automatiskt varje dag eller på en förvald dag. Alternativet kan endast konfigureras om Auto Power On (automatisk start) är satt till Enabled (aktiverad) Everyday (varje dag) eller Selected Day (vald dag) (standardinställningen är Selected Day (vald dag)) Auto Power On Date (automatiskt startdatum) Här kan du ange datumet då datorn skall starta automatiskt.
Set Supervisor Password Här kan du ange, ändra eller (ange administrationslösenord) radera administrationslösenordet Administrationslösenordet styr åtkomsten till systeminstallationsprogrammet OBS! Om du tar bort administrationslösenordet raderas användarlösenordet. Ställ in administrationslösenordet innan du ställer in användarlösenordet. User Access Level (åtkomstnivå för användare) Här kan du begränsa eller ge åtkomst till systeminstallationsprogrammet.
Boot Sequence (startsekvens) Med den här funktionen kan du ändra enheternas startordning. Boot Options (startalternativ) • USB Floppy Drive (USB-diskettenhet) — datorn försöker starta från USB-diskettenheten. Om enheten saknar operativsystem visas ett felmeddelande. • Internal HDD Devices (inbyggda hårddiskar) — datorn försöker starta från den primära hårddisken. Om enheten saknar operativsystem visas ett felmeddelande.
Ändra startordning en gång Du kan använda den här funktionen om du vill ändra den aktuella startsekvensen, exempelvis att starta från den optiska enheten för att köra Dell Diagnostics på skivan Drivers and Utilities. När de diagnostiska testen har slutförts återställs den föregående startsekvensen. 1 Om du startar från en USB-enhet, ansluter du den till en USB-port. 2 Starta (eller starta om) datorn. 3 Tryck på när F2 Setup, F12 Boot Options visas längst ned till höger på skärmen.
Rensa glömda lösenord VARNING! Innan du utför någon av åtgärderna i det här avsnittet ska du läsa igenom säkerhetsinstruktionerna som medföljde datorn och följer stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. VARNING! Datorn måste kopplas bort från eluttaget för att du ska kunna nollställa lösenordsinställningarna. 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet.
Rensa CMOS-inställningar VARNING! Innan du utför någon av åtgärderna i det här avsnittet ska du läsa igenom säkerhetsinstruktionerna som medföljde datorn och följer stegen i "Innan du börjar" på sidan 11. Mer säkerhetsinformation finns på hemsidan för regelefterlevnad på dell.com/regulatory_compliance. VARNING! Datorn måste kopplas bort från eluttaget för att du ska kunna nollställa CMOS-inställningen. 1 Ta bort stativhöljet. Se "Ta bort stativhöljet" på sidan 15. 2 Ta bort stativet.
| Systeminstallationsprogram
30 Uppdatera BIOS BIOS kan behöva uppdateras (flashas) när en uppdatering finns tillgänglig eller när du byter ut moderkortet. Så här uppdaterar (flashar) du BIOS: 1 Starta datorn. 2 Gå till support.dell.com/support/downloads. 3 Hitta filen med BIOS-uppdateringen för din dator: OBS! Servicenumret för din dator finns på en etikett på baksidan av datorn. Mer information finns i Snabbstartguiden som levererades med datorn.
| Uppdatera BIOS