Owners Manual

ManualsBrandsDell ManualsConverged InfrastructureIntegrated Systems for Oracle Database 2.0

Dell Integrated Systems for Oracle Database 2.0 - Owner’s Guide 1.1

3.2.1.2 S6000 VLAN and Port Channel configuration

Though it is recommended to have dedicated switches for the Oracle database’s public

and private traffic, in this FC-based preintegrated solution, the S6000 switches are used

for handling both types of traffic. In such configurations, it is recommended to segregate

these two network traffics within the switch. Hence, the switches are preconfigured by

segregating these two network traffics on separate VLANs. Using one of the S6000

switches as an example, Figure 8 shows the VLAN and port channel configuration on the

S6000 switches.

Figure 8 S6000 VLAN and port channel configuration

Four FortyGigE ports (0/64, 68, 72, and 76) are preconfigured for customers to connect

and communicate with the public network of Oracle database and to remotely connect

with the Management Server. If more than four is required then the undefined ports 0/96,

104, 112, and 120 can be used for the same. Similarly, if forty Gigabit network is not

available then customers can choose to use up to 15 preconfigured TenGigE ports (0/80-

94) to connect and communicate with the DISOD public network.

VLAN 30 is configured with virtual IP address that is used for managing the switch.

Dedicated physical management port on the switch is not configured. Though not

recommended, if needed, customers can configure and connect the dedicated

management port to their network for direct access and management.

By preconfiguring the Oracle database public, private, and management traffic on distinct

VLAN IDs, the DISOD ToR S6000 switches provide a secure and segregated network

environment.

120 124

112 116

104 108

96 100

88 92

80 84

72 76

64 68

56 60

48 52

40 44

32 36

24 28

16 20

8 12

0 4

Stack ID

VLAN 20 – Oracle Private (Down Stream to Rack Components)

untagged fortyGigE 0/0,8,16,24,32,40,48,56 [To Database Nodes]

VLAN 10 – Public (Down Stream to DISOD components)

untagged fortyGigE 0/4,12,20,28,36,44,52,60 [To Database Nodes]

tagged Port-channel 1(TenGigabitEthernet 0/95)[To S3048 Switch]

VLAN 10 – Public (Up Stream to Data Center Public)

untagged fortyGigE 0/64,68,72,76

untagged TenGigabitEthernet 0/80-94

VLAN 1 (Native) – UnDefined Usage

untagged fortyGigE 0/96,104,112,120

VLTi Trunk [To Peer S6000 Switch]

Peer-link Port-channel 128 (fortyGigE 0/100,108,116,124)

Tagged VLAN 1,10,20,30

VLAN 30 – DISOD private rack network

tagged Port-channel 1(TenGigabitEthernet 0/95)[To S3048 Switch]