Service Manual

Table 4. System setup options—Boot Configuration menu (continued)
Boot Configuration
By default, the custom mode option is not enabled.
Custom Mode Key Management Select the custom values for expert key management.
Table 5. System setup options—Integrated Devices menu
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Audio
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
Serial Port
Serial Port Configuration Enable or disable the serial port address.
By default, the COM1: Port is configured at 3F8h with IRQ4 option is
enabled.
USB Configuration
● Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Front USB Configuration Enable or disable the individual front USB ports.
By default, all the options are enabled.
Rear USB Configuration Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Miscellaneous Devices Enable or disable the PCI Slot
By default, the option is enabled.
Dust Filter Maintenance Enable or disable the dust filter maintenance.
By default, the Disabled option is enabled.
Table 6. System setup options—Storage menu
Storage
SATA Operation Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, the RAID Onoption is enabled.
Storage Interface
Port Enablement Enable or disable the onboard drives.
By default, all the options are enabled.
SMART Reporting
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Drive Information
SATA-0
Type Displays the SATA HDD type information of the computer.
78 System setup