User Manual

5 Then, remove the M3xL3 screws to detach the metal bracket from the HDD [1].

Installing the hard disk drive (HDD)

1 Tighten the M3xL3 screws that secure the metal bracket to the HDD

2 Connect the HDD cable interposer.

3 Insert the HDD into the connector on the computer.

4 Tighten the M2xL3 screws to secure the HDD to the computer.

5 Connect the HDD cable to the system board.

6 Install the:

a battery

b base cover

c Installing the SIM tray (WWAN models)

7 Follow the procedure in After working inside your computer.

Removing and installing components