User's Manual

Back to Contents Page

 Chassis Support Bracket

Dell™Vostro™420/220/220sServiceManual

Removing the Chassis Support Bracket

Replacing the Chassis Support Bracket



Removing the Chassis Support Bracket



1. Follow the procedures in Before Working on Your Computer.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the screw that secures the chassis support bracket.



4. Rotate the flange away from the back of the computer.



5. Disengage any cables stored in the cable clip at the top of the support bracket.



6. Lift the end of the support bracket at the back of the computer.



7. Slide the tabs at the other end of the bracket out of the slots in the chassis, and remove the bracket out of the computer.

 Vostro 220s

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTE: Only the Vostro 220s includes a chassis support bracket. You must remove the bracket before you can remove or replace many of the computer

components.

chassis support bracket

flange

screw

cable clip

tabs (2)

slots (2)