User's Manual

Removing the Primary Hard Drive

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the:

a) battery

b) base cover

3. Remove the screws that secure the primary hard drive to the computer. Slide the primary hard -drive latch to the

unlock position and pull out the hard drive from the computer.

4. Flex the hard-drive bracket outward and pull out the hard drive from the bracket.

NOTE: A rubber filler is installed to the hard-drive bracket for 7 mm hard drives. It is designed to prevent

vibrations and for correct installation of the 7 mm hard drives. 9 mm hard drives do not require the filler when

installed into the hard-drive bracket.