Dell Lasso Version 3.
Lasso is a Java-based utility that automates the collection of logs and configuration from servers, disk arrays (EqualLogic, PowerVault MD-Series and EMC), Fibre Channel switches (Brocade, McData, and Cisco), tape libraries, Ethernet and FCoE Switches. After the collection, it parses the data into an XMLfile, which is packaged with the original collection, then encrypted. The encrypted file is then uploaded to Dell for review.
LocalAccountTokenFilterPolicy and setting its data to 1 under HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Policies\system\ key and then rebooting the system. It is recommended to use the Administrator account to prevent updating and rebooting. For more information, see the directory ftp://ftp.emc.com/pub/emcgrab/Windows. NOTE: "admin$" and "c$" share must be enabled for remote commands to execute NOTE: Ensure adequate disk space to hold a copy of all event logs and other system data.
o o o o o o o o o Dell PC M6220 Dell PC 8024F Dell PC M8024 Dell PC M6348 Dell PowerConnect B-Series 8000 Cisco CBS 3130 Cisco CBS 3030 Cisco Catalyst 3750E Nexus 5020 Installation To install Lasso, you need to be an administrator or have administrator rights. Upgrade and Downgrade To upgrade or downgrade Lasso, first uninstall all existing versions. Uninstallation To uninstall Lasso use one of the following options: Go to Start -> Control Panel -> Add/Remove Programs. Locate Lasso and click on Remove.
Issue 8: Powerpath should be installed on the remote Windows host to get LUN mapping information in XML and HTML format of collection. Issue 9: Lasso cannot be installed in folder names containing special characters. Issue 10: If an older version of Lasso is installed on a folder other than the default, the customer configuration file will not be moved to the USERPROFILE\Dell\Lasso folder.
Issue 25: When Lasso GUI is opened and we uninstall through CLI, the system reboots. Resolution: Ensure that Lasso’s User Interface is closed before trying to uninstall Lasso. Issue 26: On ESX 3.5, VMFS iSCSI tab is missing in the HTML. Issue 27: Issue with v5.1 firmware on EqualLogic Array. Issue 28: Collection fails for cached credentials Clarrion host with existing 3.6 configuration. Resolution: Start with a new configuration and ensure that you do not import Lasso 3.6 customer configuration file.
Information in this document is subject to change without notice. © 2011 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell™, PowerVault™, and EqualLogic™, are trademarks of Dell Inc. Microsoft®, Windows®, Windows Server®, and Windows Vista® are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
