Owner's Manual

Description: If there are dead paths configured between VMware hosts and MD Series and EqualLogic
Arrays, Lasso fails to parse the LUN information gathered from these dead paths.
CR518655: Lasso needs to support MemKit for vSphere version 5.0.
Description: Lasso should gather all the MemKit attributes for vSphere version 5.0 host which is attached
to the EqualLogic array.
DF519120: Lasso should display valid values for Member Sessions in MemKit tab for vSphere.
Description: Lasso should display valid values for Member Sessions in MemKit tab for all the supported
vSphere versions.
DF519127: Lasso should display all vSphere iSCSI initiators information under VMware Software/Hardware
initiator tab.
Description: Lasso should display all vSphere iSCSI initiators reportable items under VMware
Software/Hardware initiator tab.
DF513980: Some of the attributes for Cisco 3750X are incorrect.
Description: Value for Uptime attribute is parsed incorrectly. Port Channel information is displayed even if
the ports are down. Also some of attributes for Port Channel section are parsed incompletely.
DF513629: Lasso should not parse incorrect values for PC Ethernet 7024 Switch for Port Channel attached
ports.
Description: Lasso is parsing wrong values for Flow Control and Link State under Port Channel attached
ports.
DF512571: For Lasso 3.9.1, all the member switches of Cisco 3750 are not parsed.
Description: If the configuration contains one master switch and any number of member switches then
only the master switch and one member switch is parsed. However, the collection contains all the switch
information.
DF517335: Lasso should correctly display the MAC Address of Port Channels for PC Ethernet M6348 Switch.
Description: Lasso is not parsing the MAC Address of Port Channels for PC Ethernet M6348 Switch. Raw
data collection has the MAC Address of Port Channel but the data is missing in the output HTML file.
DF516129: For ESXi 5.0, iSCSI VMNICs Firmware version value is not parsed completely.
Description: In ESXi 5.0, the value for the attribute "Firmware Version" in section "iSCSI VMNICs" is not
parsed completely. The Output HTML and XML files displays incomplete value for Firmware Version
attribute.
DF517538: In Cisco 2960, the temperature value and state value are incorrect.
Description: For Cisco 2960, value for attributes "Temperature" and "State" are displayed incorrectly in
output HTML file.
DF515574: Cisco 3750 should display different Uptime for the stacked Switch.
Description: For a stacked Cisco 3750 Switch, if one of the switches are brought down and then brought up
again, the value of attribute "Uptime" is displayed incorrectly in the output HTML file.
CR519573: If North America is selected as the Region then the Sub Region should be a mandatory field.
Description: In Your Company Information Screen of Lasso, if North America is selected as Region, then Sub
Region field should be set as a mandatory field.