Owner's Manual

 LASSO-241: For Windows Host with Emulex FC HBA card configured, incorrect data representation is seen for
command hbacmd GetVPD, in Lasso collection output.
 LASSO-244: VMWare ESX 4.1 Host displays incorrect “ Update version ” in Lasso output HTML report.
 LASSO-245: “ Physical Disk Type ” and “ Capacity ” Disk Group attributes for MD Series 3200i and 3600i Arrays are
displayed incorrectly in Lasso output HTML report.
 LASSO-247: Parsing for an EqualLogic array with firmware version 6.0 and synchronous replication configured fails,
and the information is missing in Lasso output HTML report.
 LASSO-256: Lasso 4.1 collection fails for NEXUS -5020 switches.
 LASSO-258: In Brocade Switch, the Switch Port attributes - WWN and Type are shown incorrect in Lasso XML and
HTML output report.
 LASSO-259: Show/Hide for Force10 switches – S50 and S60 does not work when serial number for these switches is
not parsed.
 LASSO-261: Lasso identifies Cisco Ethernet switch as Cisco FC switch type in output HTML report.
 LASSO-266: Windows Host that is part of Hypervisor cluster is not shown as “Clustered Windows Host” in output
HTML report.
 LASSO-272: After installing Lasso on Windows 2008 x64 or Vista x64 Operating System, if the system is restarted, a
blue screen or system crash is observed.
 LASSO-276: Lasso does not generate output HTML report for Force10 switches.
 LASSO-280: Lasso fails to show VLAN information for Cisco c7350-E model.
 LASSO-281: Windows host collects all the network information but fails to display all the information in Lasso
output HTML report.
 LASSO-286 Build version of Lasso that is used to perform collection, is not collected and parsed when Lasso is run
on Windows x64-Bit operating system.
 LASSO-289: Extra FC switches tab is seen in output HTML report when the collection on FC switches fails.
 LASSO-292: Lasso should display correct values for “ Port Type ” and “ Status ” for McData FC Switch.
 LASSO-295: Lasso is not uninstalled when using the command line interface (CLI) mode.
 LASSO-296: Lasso should not collect and parse "No Such Object" as Glenlivet attributes for non Glenlivet arrays.
 LASSO-298: ESX server host is not validating using Sudo Username and Password.
 LASSO-299: Lasso GUI is not displayed when launched using Program Files -> Dell -> Lasso or using command line
interface (CLI).
 LASSO-300: Lasso failed to uninstall using command line interface on Windows x64 SP2, Vista x64, and Vista x32
operating systems.
 LASSO-302: Collection fails on the Windows Host discovered by CLARiiON Storage Array when credentials are not
cached.
 LASSO-306: Lasso should display “ Volume Sync Replication ” status, when the sync replication is paused.