Owner's Manual

 LASSO-314: Lasso should show the correct value for iSCSI NIC driver version on a Linux host.
 LASSO-315: Lasso fails to collect and parse group network management IP details for an EqualLogic Storage Array.
 LASSO-317: Lasso command line interface does not work on x64 machines if 64-bit JRE is installed.
 LASSO-318: Lasso repeats the "show system" information in the collection and does not display IP address in output
HTML report for Ethernet Switches.
 LASSO-321: Secure Site option is checked by default in Customer configuration XML file when the Customer
configuration XML is loaded with secure option enabled. Also ZIP.GPG collection report is uploaded to Dell Server
instead of XML.GPG collection report.
 LASSO-323: Brocade FC switches is not parsed and does not display in the FC switches tab in output HTML report.
 LASSO-324: Lasso fails to show the information in the output HTML report if special characters are found in the
output XML report.
 LASSO-325: Validation and collection fails on PC Ethernet, Cisco, McData Blade and Brocade switches when
incorrect Enable Password is provided. However, the switch details are displayed in the output HTML report for
these switches.
 LASSO-326: Show/Hide for PowerConnect Ethernet switch does not work for some of the VLANs. The “Switch
Status” is either missing or has incorrect value in the output HTML report.
 LASSO-330: Lasso does not parse any information for EqualLogic FS7500 (NAS).
 LASSO-334: Lasso fails to validate and collect if the unit name is changed for PowerConnect B-Series and M8428-k
Switches.
 LASSO-337: Some of the BASP attributes are displayed “ Unknown ” in output HTML report.
 LASSO-338: Lasso needs to parse additional attributes for PowerConnect M8428-K (Brazos).
 LASSO-339: Lasso displays “ unknown ” in output HTML report, for some of the M1000e attributes whenever
collection fails from CLI mode.
 LASSO-341: “Show running” command output is missing in PowerConnect B-Series and M8428-K switch collection
file when Lasso is run in Telnet mode.
 LASSO-343: The positioning of Authenticated Proxy checkbox in Lasso Upload panel GUI is not consistent. Checking
the Authenticated Proxy checkbox changes the UI layout of the Upload panel.
 LASSO-345: Group Name for EqualLogic Storage Array with Appliance displays incorrect value in output HTML
report.
 LASSO-346: Lasso should display correct value for Model Number and IP Address for Cisco switches in output HTML
report.
 LASSO-347: In the Lasso “ Upload ” panel, if the user selects the radio button not to upload, the proxy details
should not be displayed in the GUI.
 LASSO-348: Lasso fails to upload collection report through proxy when logged in as an administrator.
 LASSO-349: Lasso failed to find the switch type for PowerConnect 6248 model.
 LASSO-351: Error message is displayed in the upload panel when the upload of Lasso output collection fails using
proxy information.