Owner's Manual

Resolution
Run the command "getall".
NOTE : This command provides less information.
Issue 8
Description
When Lasso is run from a Windows 7, Windows Vista, Windows Server 2008, or Windows Server 2008 R2, if the User Access
Control (UAC) is activated, the MD Series data collection is not successful.
Resolution
Make sure the User Access Control (UAC) is deactivated.
Issue 9 (DF476739)
Description
When Lasso GUI is opened and Lasso is uninstalled through CLI, the system reboots.
Resolution
Make sure that the GUI is closed before uninstalling Lasso.
Issue 10 (LASSO-233)
Description
Lasso does not validate the Cisco Ethernet Switches if SSH-1 protocol is enabled on the switch.
Resolution
Configure the switch to enable SSH-2 protocol.
Issue 11 (LASSO-396)
Description
VLan and Port Channel Show/Hide for MAC address is not working.
Resolution
Refer to output XML report for the data.
Issue 12 (LASSO-303)
Description
Revalidate button should be disabled when user clicks on Edit button for any device added previously.