User's Manual

– AFW_Delayed_ACK
– Large_Frames
• Support to collect VMware support logs in case of EqualLogic SAN using advanced mode.
• The "Secure Site (Removes Customer Identification Information (CII)) option is renamed to "Enable Report
Filtering". The "Learn More" link option provides information about the feature when selected.
• Time and speed used to perform the “Ping test” to test the connectivity between the EqualLogic devices is the
same as used by Putty.
• Support to collect diagnostics information from Cisco Nexus switches.
• Support to collect and parse the value for the “TCP Delayed ACK” Windows setting from Windows Host
attached to EqualLogic, MDSeries, and Compellent SAN.
• Provide Ethernet Switch Type as:
– PowerConnect — collect and parse all the Power Connect switches and PowerConnect M8428K. Only
collect for all PowerConnect B8000 switches.
– Brocade Ethernet — collect for all Brocade B8000 switches.
• Display the build version of Lasso used for collection on the top of the HTML report.
• Provide the error code and the message when process fails during collection, parsing, or report upload for a
SAN device.
• Collect and parse the output from “esxcli iscsi networkportal list" command of the iSCSI Network cards for
VMware version 5.0 and later.
Key Features
The key features are:
• Collect and parse Qlogic FC HBA information for Windows and Linux hosts attached to Compellent.
• Optional user name and password credentials when PowerConnect ethernet switch is configured.
• Raw data collection support for Enclosures.
• Data collection and parsing support for HITKIT for VMware.
• Encrypted password support while running Lasso in the CLI mode.
• Collect diagnostic information from the Group Lead and member, when member IP address is provided.
• Option to automatically upload the report to Dell Technical Support site.
• Support for the PS 4110 and PS 6110 devices.
• Collect and parse Host Integration Tool Kit data in the EqualLogic SAN for Windows, Linux and, vSphere hosts.
• Option to provide the Delta Service Request number and Project Manager ID and include in the XML and HTML
reports.
• Parser support for the following devices:
– EqualLogic FS7500
– Force 10 S50/S60/S4810 switches
– Xen server
– PowerVault NX3500
• Solution for error 904 (Collection of EQL Details Failed) for the EqualLogic Array.
• Parser support for MaxRequestHoldtime for all the Windows hosts in EqualLogic and MDSeries SAN.
• Collect and parse Broadcom NIC information when running in Host Bus Adapter (HBA) mode under the control
of Broadcom Advanced Server Program (BASP) software.
• Collect NAS Appliance information from the EQL group.
• Support for firmware version 5.2 and 6.0 on Dell EqualLogic Arrays.
• Collect and parse the attributes ROM Level and Last Boot Time from EqualLogic Array.
4