User's Manual

Field Description
Ethernet & FCoE Switches Select this option to collect data for the ethernet and FCoE
switches.
Tape Libraries Select this option to collect data for the tape libraries.
Attached Hosts Select this option to collect data for the attached hosts.
Enclosures Select this option to collect data for the enclosure(s).
Management & Monitoring Software Select this option to collect data for the management and
monitoring software.
NOTE: Lasso does not support Tape Libraries in this release.
To collect more details, the required device page is displayed for each selected device.
If previous configuration of Lasso is used and you want to add a specific device, then select the required device option.
If you remove an already selected device, then “ The option you have selected will result in all <type of devices> being
removed from the configuration. Do you wish to continue?” message is displayed. Click Yes to remove the device. Else,
click No.
Click Previous to display the Your Company Contacts page.
Your Hardware Environment: Storage Arrays
In this page, select the type of storage array(s) in your SAN environment, enter the details, and click Continue.
Storage Arrays in your environment
Clicking the image next to the Storage Array provides the validation status. If validation is successful,
image is displayed. Else, image is displayed.
To edit the selected storage array, click Edit available next to the Storage Array. Update the required fields and click
Update Storage Array to save the updates. Else, click Cancel.
To delete a Storage Array, click Delete available next to the array.
To verify the storage array(s) from the existing user configuration, select the required storage array(s) and click
Revalidate Selected Storage Arrays.
Add/Modify Storage Array information
To add or modify the storage array, select the type of storage from the drop down list and enter information in the
required fields. Click Save New Storage Array to save. Else, click Cancel. The saved array(s) is displayed in the Storage
Arrays in your environment section and the validation starts for the saved array.
Field Description
Type of Storage Array Select from the following type of Storage Array(s):
Celerra
CLARiiON
EqualLogic
EQL FluidFS NAS
28