User's Manual

Field Description
Save as the default Username & Password for additional
Ethernet switches
Select this option to save the user name and password
authentication as default for additional ethernet switches.
NOTE: Username, Password, and Enable Password credentials are optional for Cisco Ethernet type of Ethernet
Switches.
Click Previous to display the Your Hardware Environment page.
Your Hardware Environment: Tape Libraries
NOTE: Lasso does not support Tape Libraries in this release.
In this page, select the type of Tape Library in your SAN environment, enter the details, and click Continue.
Tape Libraries in your environment
Clicking the image next to the Tape Library provides the validation status. If validation is successful,
image is displayed. Else, image is displayed.
To edit the selected Tape Library, click Edit available next to the Tape Library. Update the required fields and click
Update Tape Library to save the updates. Else, click Cancel.
To delete a Tape Library, click Delete available next to the tape library.
To verify the tape devices from the existing user configuration, select the tape device and select Revalidate Selected
Tape Libraries option.
Add/Modify Tape Library Information
To add or modify Tape Library information, select the type of Tape Library from the drop down list and enter the data in
the required fields. Click Save New Tape Library to save, display the information in the Tape Libraries in your
environment section, and start validation of the Tape Library. Else, click Cancel.
Field Description
Type of Tape Library Select from the following type of Tape Library(s):
• ML6000
• PV132T
• PV136T
• TL2000
• TL4000
IP/hostname Enter the IP address or the host name for the selected
type of Tape Library.
Username Enter the user name.
Password Enter the password.
Save as the default Username & Password for additional
Tape Libraries
Select this option to save the user name and password
authentication information as default for additional Tape
Libraries.
32