User's Manual

NOTE: Only IP address or host name is required for TL2000 and TL 4000.
NOTE: Only IP address or host name and password required for ML6000.
Click Previous to display the Your Hardware Environment page.
Your Hardware Environment: Hosts
In this page, select the type of host operating system in your SAN environment, enter the details, and click Continue.
Hosts in your environment
Clicking the image next to the host provides the validation status. If validation is successful, image is
displayed. Else, image is displayed.
To edit the selected host operating system, click Edit available next to the host. Update the required fields and click
Update Host to save the updates. Else, click Cancel.
To delete a host operating system, click Delete available next to the host.
To verify the hosts attached to storage arrays from the existing user configuration, select the hosts and click Revalidate
Selected Hosts.
Add/Modify Host information
To add or modify host information, select the type of host operating system from the drop down list and enter the data in
the required fields. Click Save New Host to save, display the information in the Hosts in your environment section, and
start validation of the host. Else, click Cancel.
Field Description
Type of Host OS Select from the following Type of Host OS:
• AIX
• HP-UX
• Linux
• Solaris
• VMware
• Windows
IP/hostname Enter the IP address or the host name for the selected
type of host operating system.
Username Enter the user name.
Password Enter the password.
Root Password Enter the root password.
Type of Storage Array Select from the following type of Storage Array(s):
• Celerra
• CLARiiON
• EqualLogic
• MD Series
33