User's Manual

Error Code Error Message
1 Unable to complete operation. Check the log file.
2 Undefined device subtype. Check the log file.
3 Undefined device type. Check the log file.
4 Operation in progress.
5 One or more collection failed.
This is applicable only in case of multiple device collection
and not for single device collection. When you invoke
Lasso in quiet mode (CLI) with a customer configuration
file, and if any one of the device collection fails, Lasso will
exit with this error.
6 Collection and upload failed.
If the collection failed and also the upload, Lasso will exit
with this error code.
9 Unknown option. Check the log file.
10 Parameter is already specified for the session. Check the
log file.
101 %emcExecutable% not found. The package is either
corrupt or not installed correctly. Try to reinstall Lasso. If
this error persists, contact Dell at
[e-mail].
102 %dsetExecutable% not found.
103 Failed to determine remote system drive and remote
system root.
The xCmd.exe program is unable to determine the remote
system's drive. Also check the device security settings to
verify if the settings are preventing Lasso from running
automated scripts.
NOTE: If Lasso is running on Windows 7 (x64) or
Windows 2008 server R2 (x64), then validation and
collection on Windows 2000 remote server will fail.
104 Failed to create temporary directory on remote host.
The xCmd.exe program is unable to determine the remote
system's drive. Also check the device security to verify if
the settings are preventing Lasso from running automated
scripts.
105 Failed to retrieve completed collection from remote
system.
Lasso is unable to copy the completed collection from the
remote system. Make sure that dot net version 2.0 or later
is installed on the remote system to run Dell Collector and
create the collection file. Try to run Lasso again.
106 Failed to copy EMC Reports to remote host.
Lasso is unable to copy the script from the remote system
and the script may be suspended. Try to reboot the remote
70