User's Manual
Error Code Error Message
416 Manually telnet to the device to make sure it is
responsive.
417 Collection timed out.
Try to run the collection when the system is not loaded.
418 Switch collection failed.
You may try to collect switch manually.
419 Timed out during validation.
420 Collection Failed.
421 Make sure that MDSM software has valid permissions.
422 Failed to retrieve diagnostic files from FTP Site.
489 I/O module does not have any IP that is used for telnet
session to be established.
499 Authentication validation failed!
Try validation again, and check username and password.
500 For information, see
• Troubleshooting
• Manual Collection
501 Unable to bind to the Controller specified.
Verify the IP Address.
601 Vault password is incorrect.
602 Connection failed!
Make sure that the IP/device is valid and reachable.
700 Failed to copy Dell Collector to remote host.
The remote host may be preventing the copy of the script.
Lasso has tried to copy the script and it is possible that the
remote script is suspended. You may need to reboot the
remote host. If rebooting fails, try to use the Task Manager
on the remote host and try to terminate the DellCollector
process.
701 Failed to copy dependant DLL which are used for zipping
the collection files on the remote host.
702 Host collection execution failed.
The remote host may be preventing the execution of the
script. Lasso has tried to copy the script and it is possible
that the remote script is suspended. You may need to
reboot the remote host. If rebooting fails, try to use the
Task Manager on the remote host and try to terminate the
DellCollector process.
703 Failed to rename Collection File name on the remote host.
75