Dell Lasso Version 4.
Release Notes Lasso Lasso is a Java-based utility that automates the collection of logs and configuration from servers, disk arrays (EqualLogic, PowerVault MD-Series, and EMC), Fibre Channel switches (Brocade, McData, and Cisco), Ethernet and FCoE switches (PowerConnect, Cisco, Brocade, and Force 10), Enclosures (Dell M1000e Chassis, Dell VRTX Chassis) and Management and Monitoring software.
• Windows Operating Systems: − Windows Server 2003 Standard, Enterprise, and Datacenter Editions − Windows Server 2003 R2 Standard and Enterprise Editions − Windows Server 2003 x64 Standard, Enterprise, and Datacenter Editions − Windows Server 2003 x64 R2 Standard and Enterprise Edition − Windows Server 2008 R2 Standard, Enterprise, and Datacenter − Windows Server 2008 x64 Standard, Enterprise, and Datacenter − Windows Server 2008 x86 Standard, Enterprise and Datacenter Editions − Windows 20
• • • − Cisco CBS 3130 − Cisco CBS 3030 − Cisco Catalyst 3750E − Cisco Nexus 5020/7000/5548 − Dell Force10 S25P/S50/S60/S2410/S4810/S4820T/S6000/S5000 − Dell Force10 MXL 10/40GbE − Dell Force10 150/C300/E300(TeraScale)/E600i(ExaScale)/E1200i(ExaScale)/Z9000 − Brocade 8000 Enclosures − Dell M1000e Chassis − Dell VRTX Chassis Management and Monitoring Software − HIT Kit For VMware − SAN HQ − VCenter 5.0 and 5.
− For more information on ESX and ESXi, see the readme file available at ftp://ftp.emc.com/pub/emcgrab/ESX/. NOTE: Make sure that SSH is installed and configured. Credentials for normal user is required to establish SSH session, and root password is required to run commands as root. NOTE: Make sure adequate disk space is available to store a copy of all logs and system data that is collected. • Fibre Channel Switches: Enable Telnet on all McData switches for Lasso to collect from them.
• Support for in CLI collection. • Enhancement for output messaging format.
None Issue 2: Description The NX4 configuration is not sent if you run a collection for NX4 without root credentials and the “send full collection” option is cleared. Resolution Make sure that the "send full collection" option is selected before running a collection for NX4 without root credentials.
NOTE: This command provides less information. Versions/Systems Affected None Issue 7: Description When Lasso is run from a Windows 7, Windows Vista, Windows Server 2008, or Windows Server 2008 R2, if the User Access Control (UAC) is activated, the MD Series data collection is not successful. Resolution Make sure the User Access Control (UAC) is deactivated.
None Issue 12 (Lasso-1593): Description Lasso collection is unsuccessful on some windows hosts and expects WMI service to be manually restarted. Resolution Windows Management Instrumentation (WMI) service needs to be re-started manually. Versions/Systems Affected Lasso 4.5 Limitations Issue 1 Description DF351714, DF449573, and LASSO-309: On importing .SAN file in Lasso 4.0/4.1/4.
Add xCmd.exe as a trusted program in the exception list of McAfee and AVG antivirus respectively. Resolution None Versions/Systems Affected None Issue 5: Description Windows host validation fails if “xCmd” is registered erroneously. Resolution: Check the host’s services to verify if “xCmd” is registered erroneously. If yes, run “sc delete xCmdSvc” on the remote host to remove it and retry validation.
None Versions/Systems Affected None Issue 10: Description To run Lasso, command line JRE Version 1.6 or later is required. Resolution None Versions/Systems Affected None Issue 11: Description Lasso installer does not support SystemRoot directory as the destination folder. Therefore, do not select this directory as the destination folder during Lasso installation.
None Issue 15: Description Stacking is not supported for Power Connect 55xx and Force10 S55/S5000/S6000 Switches. Resolution None Versions/Systems Affected Lasso 4.4 Issue 16: Description ESX - Lasso doesn't parse proper data for vmknic and IP Family if the description exceeds 20 characters under Kernel NIC section. Resolution If the vmknic description exceeds 20 characters, the data will shift to next column. Versions/Systems Affected Lasso 4.5 Installation Prerequisites Not applicable.
2. 3. 4. Select your support category. Verify your country or region in the Choose a Country/Region drop-down menu at the top of page. Select the appropriate service or support link based on your need. Accessing Documents From Dell Support Site To access the documents from Dell Support site: 1. 2. 3. 4. 5. Go to dell.com/support/manuals. In the Tell us about your Dell system section, under No, select Choose from a list of all Dell products and click Continue.
