Owner's Manual

None
Issue 2:
Description
The NX4 configuration is not sent if you run a collection for NX4 without root credentials and the “send
full collection” option is cleared.
Resolution
Make sure that the "send full collection" option is selected before running a collection for NX4 without
root credentials.
Versions/Systems Affected
None
Issue 3:
Description
If an earlier version of Lasso is installed in a folder other than the default version, the customer
configuration file is not moved to the
USERPROFILE\Dell\Lasso folder.
Resolution
Move the customer configuration file or use "Load a configuration file" option from Lasso Welcome
page to use an existing customer configuration file.
Versions/Systems Affected
None
Issue 4:
Description
The Device Collection page may have duplicate vertical and horizontal scroll bars if the window is
resized, or if there are too many devices in the configuration.
Resolution:
Use the full screen mode or increase the resolution.
Versions/Systems Affected
None
Issue 5:
Description
Lasso's "auto-discover" feature works only for EMC CLARiiON arrays and not for hosts attached to
Celerra, EqualLogic, and PowerVault MD Arrays.
Resolution
For those arrays, enter the name or IP address of each attached host.
Versions/Systems Affected
None
Issue 6:
Description
spcollect command is not supported on EMC Arrays having FLARE less than R13.
Resolution
Run the command "getall".