User's Manual

• Option to provide the Delta Service Request number and Project Manager ID and include in the XML
and HTML reports.
• Parser support for the following devices:
– EqualLogic FS7500
– Force 10 S50/S60/S4810 switches
– Xen server
– PowerVault NX3500
• Solution for error 904 (Collection of EQL Details Failed) for the EqualLogic Array.
• Parser support for MaxRequestHoldtime for all the Windows hosts in EqualLogic and MDSeries SAN.
• Collect and parse Broadcom NIC information when running in Host Bus Adapter (HBA) mode under
the control of Broadcom Advanced Server Program (BASP) software.
• Collect NAS Appliance information from the EQL group.
• Support for firmware version 5.2 and 6.0 on Dell EqualLogic Arrays.
• Collect and parse the attributes ROM Level and Last Boot Time from EqualLogic Array.
• Support for Array ping test between the members within an EqualLogic Group.
• Collect and parse the Qlogic iSCSI adapter information from Windows, Linux, and VMware hosts
attached to Compellent.
• Collect Emulex information from Windows, Linux, and VMware hosts attached to Compellent.
• Collect and parse SAS HBA information from Windows and Linux (32-bit only) hosts attached to
PowerVault MD Series and Compellent.
• Validate user input for Ethernet Switch type in the related GUI pages.
• Include Collection Date - Collection Time - Build Version attributes in the HTML report.
• Enhance user interface in compliance with Dell's lucidity usability requirement.
• Validate the PC Ethernet Switch, when configured with only user name.
• Raw data collection and parsing for the PowerConnect ethernet switches in simple and normal mode.
• Correct parsing of service tag information for all the models of EqualLogic Arrays upon v5.1 Firmware
upgrade.
• Solution for error 105 (failed to retrieve completed collection from remote system) for the Windows
2008 R2 host attached to EqualLogic Array.
• Option to re-validate the devices when imported from an existing configuration.
• Use of Forced multi-threaded mode of execution for enhanced Lasso performance.
• Solution to parse EqualLogic Array if the EqualLogic IP Address last octet is single digit issue.
• Secure Site option in the Your Company Information window of the Lasso GUI to remove Customer
Identification Information (CII) from XML format of the collection.
• Raw data collection and parser support for the following devices:
– Cisco switches 3750E/3750X and 4948
– PowerConnect ethernet switches 7024/7048
– vSphere 5.0 hosts attached to EqualLogic and MD Series arrays
– Pirates 1GB - PS4100/PS6100
• Raw data collection support for Force10 (S50N/S481) Switches.
• Correct parsing of PowerConnect ethernet switches upon v4.1 Firmware upgrade.
• Display information only related to EqualLogic iSCSI volumes in vSphere iSCSI VMFS section.
• Collect and parse Hit Kit data for Linux Hosts in EqualLogic SAN.
• Include ehcmcli -d command output as part of Linux collection.
• Display the applicable attributes for non-configured Ethernet ports of EqualLogic Arrays.
10