User's Manual

• Raw data collection and limited parsing for PowerVault NX3500 and EqualLogic FS7500.

• Display the iSCSI network for different subnet masks.

• Collect the applicable attributes for vSphere Hosts for all possible path selection policies.

• Parse the attributes related to Port Channel for Power Connect and Cisco Switches.

• Option to choose SSH or Telnet protocol in case of Ethernet Switches.

• Report the updated version for vSphere host by Lasso.

• Parse all the iSCSI virtual machine network interface cards in the vSphere environment.

• Parse and display cluster name and Is Cluster member attributes for clustered windows host.

• Support for Power Connect 7024, 8024, 8024F, M8024F, M8024-k, M6220, M6348 with version 4.1

firmware.

• Solution for the Interface Name under iSCSINode for Linux Hosts in the XML format of collection

issue.

Supported Devices

The following table provides the types of supported storage devices:

Storage Device Types of Devices

Storage Arrays

• Dell EMC Storage processors

– CX3 series— Tackhammer (CX3–10),

Jackhammer (CX3–20), Sledgehammer

(CX3–40), and Mallet (CX3–80)

– CX4 (Fleet) series— Nautilus (CX4–120),

Ironclad (CX4–240), Trident (CX4–480),

and Dreadnought (CX4–960)

– AX series — Mamba (AX4–5F, AX4–5i, and

AX4–5FX)

• PowerVault MD Series arrays — MD3000,

MD3000i, MD3200, MD3220, MD3200i,

MD3220i, MD3600i, MD3600f, MD3620f, and

MD3660f

• EqualLogic PS series release 4.3 and later

• Dell EMC Celerra Storage devices (NAS)

• EqualLogic Fluid File System (NAS)

• PowerVault Fluid File System (NAS)

• Compellent FluidFS NAS

Fibre Channel Switches

• McData and Blade switches except director

class switches

• Cisco 9124

• Brocade 200E/4424/300/5100/5300/6520

NOTE: Telnet must be enabled on all McData

switches for Lasso to collect the data.

Tape Libraries

• PV136T

• PV132T

• TL2000

• TL4000