User's Manual

Your Hardware Environment: Tape Libraries
NOTE: Lasso does not support Tape Libraries in this release.
In this page, select the type of Tape Library in your SAN environment, enter the details, and click
Continue.
Tape Libraries in your environment
Clicking the image next to the Tape Library provides the validation status. If validation is successful,
image is displayed. Else, image is displayed.
To edit the selected Tape Library, click Edit available next to the Tape Library. Update the required fields
and click Update Tape Library to save the updates. Else, click Cancel.
To delete a Tape Library, click Delete available next to the tape library.
To verify the tape devices from the existing user configuration, select the tape device and select
Revalidate Selected Tape Libraries option.
Add/Modify Tape Library Information
To add or modify Tape Library information, select the type of Tape Library from the drop down list and
enter the data in the required fields. Click
Save New Tape Library to save, display the information in the
Tape Libraries in your environment section, and start validation of the Tape Library. Else, click Cancel.
Field Description
Type of Tape Library Select from the following type of Tape Library(s):
• ML6000
• PV132T
• PV136T
• TL2000
• TL4000
IP/hostname Enter the IP address or the host name for the
selected type of Tape Library.
Username Enter the user name.
Password Enter the password.
Save as the default Username & Password for
additional Tape Libraries
Select this option to save the user name and
password authentication information as default for
additional Tape Libraries.
NOTE: Only IP address or host name is required for TL2000 and TL 4000.
NOTE: Only IP address or host name and password required for ML6000.
Click Previous to display the Your Hardware Environment page.
35