Owner's Manual

NOTE : For EqualLogic, MD series, and Compellent SAN, Net framework 2.0 or later must be
installed on the remote Windowshost to successfully collect data.
NOTE : For EqualLogic, Compellent, and MD series SAN, the SANsurfer CLI (iSCSI) software must
be installed on the remote Windows, Linux, and VMware hosts to successfully collect iSCSI HBA
information.
NOTE : For Compellent SAN, the SANsurfer CLI (FC) must be installed on the remote Windows,
Linux, and VMware host to successfully collect Qlogic FC HBA collection.
NOTE : For Compellent SAN, the HBAnyware CLI must be installed on the remote Windows,
Linux, and VMware host to successfully collect Emulex FC HBA collection.
 To collect from EMC, use a system that is not a Fibre Channel attached host.
 To collect from EqualLogic, install Lasso on one of the iSCSI hosts.
 For ESX/ESXi, the normal or sudo user should have PasswordAuthentication or Keyboard
interactive authentication enabled.
 For ESX/ESXi, the root user should have permitrootlogin enabled and the
PasswordAuthentication or Keyboard interactive authentication should be enabled.
 For PowerVault MD Series devices, MD Storage Manager Software should be installed in the
system running Lasso.
 For SAN HQ devices, Dell Equallogic SAN Headquarters Server version should be installed in the
windows host.
Known Issues
Issue 1:
Description
The NX4 configuration is not sent if you run a collection for NX4 without root credentials and the “send
full collection” option is cleared.
Resolution
Make sure that the "send full collection" option is selected before running a collection for NX4 without
root credentials.
Versions/Systems Affected
None
Issue 2:
Description
If an earlier version of Lasso is installed in a folder other than the default version, the customer
configuration file is not moved to the USERPROFILE\Dell\Lasso folder.
Resolution
Move the customer configuration file or use "Load a configuration file" option from Lasso Welcome
page to use an existing customer configuration file.
Versions/Systems Affected
None
Issue 3:
Description
Lasso's "auto-discover" feature works only for EMC CLARiiON arrays and not for hosts attached to
Celerra, EqualLogic, and PowerVault MD Arrays.
Resolution