User's Manual

Error Code Error Message
223
SAN HQ server version not found.
295
Compellent Storage Client exe is not found.
Make sure that the Compellent Storage Client exe
is available in the bin folder.
297 Failed to get Service Tag Information.
Refer to Manual UNIX collection and Linux Service
Tag Collection.
300 NaviCLI.exe was not found.
The file should be in the C:\Program Files\EMC
\Navisphere CLI location by default. If file is not
found, run the installer again.
301 NaviCli version could not be determined.
Make sure that Navisphere CLI is installed. Run the
installer again. The installer will check and install.
302 Navisphere CLI command failed trying to retrieve
Agent Revision.
Verify that SP is accessible on the network, and the
firewalls are not blocking the access. See the
Troubleshooting section for more details.
303 Failed to retrieve completed SP Collect from SP.
Connect to SP through Navisphere Manager and
use the File Manager to get the SP Collect.
304 Failed to collect getall.
Make sure that the SP is available and running.
Also, connect to Navisphere Manager setup page
and restart the management server.
305 Failed to collect getlog.
Make sure that the SP is available and running.
Also, connect to Navisphere Manager setup page
and restart the management server.
306 NaviCLI getagent failed.
Make sure that the SP is available and running.
Also, connect to Navisphere Manager setup page
and restart the management server.
307 Failed to create .zip file out of getall and
getlog.
Manually, you may need to compress the getall
and getlog into a .zip file. Then include it in
another .zip file so Wrangler can read it.
101