User's Manual
Error Code Error Message
411 Switch collection was complete, but collection file
not found!
You may try to collect switch data manually.
412 Tape Library collection was complete, but
collection file not found!
You may try to collect tape library data manually.
NOTE: Lasso does not support Tape Libraries
in this release.
413 Switch collection file not moved properly!
You may try to collect switch manually.
415 Could not open connection to the Specified IP
Address!
416 Manually telnet to the device to make sure it is
responsive.
417 Collection timed out.
Try to run the collection when the system is not
loaded.
418 Switch collection failed.
You may try to collect switch manually.
420 Collection was not successful. Cannot start
SCVMM collector in the remote host.
422 Failed to retrieve diagnostic files from FTP Site.
423 Remote VMM script was not run because the user
cancelled the collection process.
424 Cannot run script as PSD file path not found.
450 Malformed URL found!
Error in connection or invalid host name.
489 I/O module does not have any IP that is used for
telnet session to be established.
498
Maximum SSH/Telnet remote sessions are active.
Close the active sessions and try to validate again
499 Authentication validation failed!
Try validation again, and check username and
password.
500 For information, see
• Troubleshooting
103