Owner's Manual

 iSCSI HBA:
o Adapter Details
o SAN Statistics
o Network Portals
o Physical Network Portals
o Logical Network Portals
o SAN iSCSI
o VAAI Status
 FC HBA
o Storage Adapters
o Storage FC Adapters
o Storage Core Devices
o Storage File Systems
 Support to collect and parse Device ID, Vendor ID, Subdevice ID, and Subvendor ID for Network Interface
Card (NIC), Converged Network Adapter (CNA) and HBA connected to Dell SAN and Networks on
Windows.
Note: Emulex card details are collected but not parsed.
 Support for HitKit for Windows version 4.7 and Linux version 1.3.
 Support to parse the output from any Lasso collection using the command parse.cmd.
 Support to view the status messages in the collector log.
 Enhanced performance of Windows host collection.
 Support to download Dell System E-Support Tool (DSET) add-on by using the Add-ons option from the
Welcome to Lasso window.
Fixes
The following problems were reported in earlier releases of Lasso are corrected in this release:
 Lasso-3045: Lasso collection on a N4032F switch completes with Improper message and the return
Error:150.
 Lasso-3046: N Series switch - Many attributes are parsed wrongly.
 LASSO-3137: Lasso fails to parse Subnet include and Exclude list for Linux host configured with HITKIT 1.3
 LASSO-3105: Failure to parse TC Group, Priority, Bandwidth and TSA on S4810 switch using Lasso
4.5.0.436
 Lasso-3201 : Hosts Panel should mandate the selection of a storage array or "No storage type"
Important Notes
 Make sure IP connectivity is available to all defined devices.
 .NET framework 2.0 and SP v1.0 or later.
NOTE : For EqualLogic, MD series, and Compellent SAN, Net framework 2.0 or later must be
installed on the remote Windowshost to successfully collect data.
NOTE : For EqualLogic, Compellent, and MD series SAN, the SANsurfer CLI (iSCSI) software must
be installed on the remote Windows, Linux, and VMware hosts to successfully collect iSCSI HBA
information.
NOTE : For Compellent SAN, the SANsurfer CLI (FC) must be installed on the remote Windows,
Linux, and VMware host to successfully collect Qlogic FC HBA collection.
NOTE : For Compellent SAN, the HBAnyware CLI must be installed on the remote Windows,
Linux, and VMware host to successfully collect Emulex FC HBA collection.