Owner's Manual

 To collect from EMC, use a system that is not a Fibre Channel attached host.
 To collect from EqualLogic, install Lasso on one of the iSCSI hosts.
 For ESX/ESXi, the normal or sudo user should have PasswordAuthentication or Keyboard
interactive authentication enabled.
 For ESX/ESXi, the root user should have permitrootlogin enabled and the
PasswordAuthentication or Keyboard interactive authentication should be enabled.
 For PowerVault MD Series devices, MD Storage Manager Software should be installed in the
system running Lasso.
 For SAN HQ devices, Dell Equallogic SAN Headquarters Server version should be installed in the
windows host.
 For PowerConnect Controller, make sure the following ports are enabled and are accessible on
the controller:
SSH: Port 22.
Telnet: Port 23.
SNMP: Port 161. To enable SNMP, in a browser, enter the <Controller IP Address> to connect to
the controller. In the Mobility Controller page, go to Configuration>SNMP and add the SNMP
community string.
Note: The community string is case-sensitive.
 For System Center Virtual Machine Manager (SCVMM), powershell must be enabled in target
Windows VMM host.
 For Broadcom 57810 CNA collection, Broadcom Advanced Server Program (BASP),Broadcom
Advanced Control Suite (BACS) management application should be installed on the remote
windows host.
Note: For Brocade collection, Brocade Command Line Utility (BCU) must be installed on the
remote windows host.
 For VRTX, to collect the integrated server information, Lasso should be run as an administrator.
 For FluidFS 7600, make sure that FTP is enabled and you need to provide the CLI credential
information for FluidFS NAS version 3.0 collection or validation.
 For importing data from the excel sheet, use the Sample_DeviceConfig_Data.xltx file from
C:\Program Files (x86)\Dell\Lasso.
 Lasso MS should have connectivity to remote Dell FTP site (ftp.dell.com) direct or through proxy.
Known Issues
Issue 1:
Description
The NX4 configuration is not sent if you run a collection for NX4 without root credentials and the “send
full collection” option is cleared.
Resolution
Make sure that the "send full collection" option is selected before running a collection for NX4 without
root credentials.
Versions/Systems Affected
None
Issue 2:
Description
If an earlier version of Lasso is installed in a folder other than the default version, the customer
configuration file is not moved to the USERPROFILE\Dell\Lasso folder.
Resolution