User Manual

NOTE: Once the battery cable is disconnected, practice caution not to damage the battery connector on the system

board. The pins of the battery connector are extremely fragile, be careful not to bend the pins.

NOTE: For defective system boards, technicians must always ensure that they attach the battery connector cap when

re-packaging it for return.

Installing the battery

1 Insert the battery into the slot on the tablet.

2 Replace the M2x3 (4) screws to secure the battery to the tablet.

3 Install the:

a display panel

b microSIM card and microSD card

4 Follow the procedure in After working inside your tablet.

Power switch board

Removing the power button board

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a microSIM card and microSD card

b display panel

c battery

3 To remove the power button board:

a Lift the latch and disconnect the power button cable from the tablet [1].

Removing and Installing components