User Manual

a Remove the M2x2.0 (1) screw securing the WLAN bracket [1].

b Lift the WLAN bracket away from the system board [2].

c Disconnect the antenna cables from the WLAN card [3].

d Slide and lift the WLAN card from the connector on the system board 4].

Installing the WLAN card

1 Insert the WLAN card into the connector on the system board.

2 Connect the antenna cables to the WLAN card.

3 Insert the WLAN bracket to the WLAN card.

4 Replace the M2x2.0 (1) screw to secure the WLAN bracket.

5 Install the:

a battery

b display panel

c microSIM card and microSD card

6 Follow the procedure in After working inside your tablet.

PCIe Solid State Drive (SSD)

Removing the SSD module

1 Follow the procedure in Before working inside your tablet.

2 Remove the:

a microSIM card and microSD card

Removing and Installing components