User Manual

b display panel

c battery

3 To remove the SSD module:

a Remove the M2x2.0 (1) screw securing the SSD shield [1].

b Lift the SSD shield away from the tablet [2].

c Slide and lift the SSD module from the slot on the tablet [3].

Installing the SSD module

1 Insert the SSD module into the connector on the system board.

2 Install the SSD shield on the SSD module.

3 Replace the M2x2.0 (1) screw to secure SSD shield.

NOTE

: Align the shield carefully or else it may break.

4 Install the:

a battery

b display panel

c microSIM card and microSD card

5 Follow the procedure in After working inside your tablet.

Removing and Installing components