User Manual

3 Replace the M1.6x4 (2) screws to secure the docking board to the tablet.
4 Connect the docking board cable to the connector on the system board.
5 Install the:
a battery
b display panel
c microSIM card and microSD card
6 Follow the procedure in After working inside your tablet.
Thunderbolt over Type-C USB bracket
Removing the thunderbolt over Type-C bracket
1 Follow the procedure in Before working inside your tablet.
2 Remove the:
a microSIM card and microSD card
b display panel
c battery
3 To release the thunderbolt over Type-C bracket:
a Remove the M2x2.0 (3) screws securing the thunderbolt over Type-C bracket to the tablet [1].
b Slide and lift the thunderbolt over Type-C bracket from the tablet [2].
36
Removing and Installing components