Owner`s manual

5. Remove the docking board from the computer and disconnect the home-button board cable.

Installing the Docking Board

1. Connect the home-button board cable to the docking board and place the docking board in its slot in the computer.

2. Tighten the screws to secure the docking board to the computer.

3. Connect the docking board power flex cable to the connector.

4. Install the:

a) front camera

b) speaker

c) WWAN Card

d) SmartCard reader

e) base cover

f) battery

5. Follow the procedures in

After Working Inside Your Computer

Removing the System Board

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the:

a) battery

b) base cover

c) SmartCard reader

d) WWAN card

e) speaker