Owner manual

Back to Contents Page
 Processor Thermal-Cooling Assembly
Dell™Latitude™120LServiceManual
Removing the Processor Thermal-Cooling Assembly
Replacing the Processor Thermal-Cooling Assembly
Removing the Processor Thermal-Cooling Assembly



1. Follow the instructions in Before Working Inside Your Computer.

2. Turn the computer upside-down.

3. Loosen the captive screw in the thermal-cooling/processor cover and remove the cover.

4. Loosen in consecutive order the four captive screws, labeled "1" through "4," in the thermal-cooling assembly.

5. Lift the thermal-cooling assembly out of the computer by pulling straight up on the pull-strap.
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1
thermal-cooling assembly pull-strap
2
captive screws (4)

