Owner manual

Replacing the Processor Thermal-Cooling Assembly

1. Lower the processor thermal-cooling assembly into place on top of the processor, aligning the numbered screws, labeled "1" through "4," with the
numbers on the fan assembly, and the arrow on the pull-strap pointing toward the outside edge of the system board.

2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.

3. Replace the thermal-cooling/processor cover and tighten the screw.
Back to Contents Page

NOTICE: Before you install the replacement processor thermal-cooling assembly, remove the mylar that covers the thermal grease on the assembly.