Owners Manual
eLift the power and volume control board away from the computer [5.[
Installing the power and volume control board
1 Place the power and volume control board on the computer.
2 Tighten the screw to secure the power and volume control board to the computer.
3 Route the cables through the cable routing clips.
4 Connect the power and volume control board to the connector on the system board.
5 Ax the adhesive tape to secure it.
6 Install the:
acoin cell battery
bbattery
cbase cover
7 Follow the procedure in After working inside your computer.
)SSD(
Removing the solid state drive (SSD) card
1 Follow the procedure in Before working inside your computer.
2 Remove the:
abase cover
17