Owners Manual
Installing the LED board
1 Insert the LED board into the slot on the computer.
2 Ax the adhesive tape to secure the LED board to the computer.
3 Ax the LED board cable and connect the LED board cable to the connector.
4 Install the:
abattery
bbase cover
5 Follow the procedure in After working inside your computer.
/ )I/O(
Removing the Input/Output (I/O) board
1 Follow the procedure in Before working inside your computer.
2 Remove the:
abase cover
bbattery
3 To remove the I/O board:
aPeel the adhesive tape to access the I/O board cable [1.[
bLift the latch and disconnect the I/O board cable from the I/O board [2.[
cDisconnect the coin cell battery and power and volume button board cables from the I/O board [3.[
dRemove the screw that secures the I/O board to the computer [4.[
eLift the I/O board away from the computer [5.[
27